S3FC5P25LO2 Annular Ball Bearing

Comprehensive specifications and application details for: S3FC5P25LO2 Annular Ball Bearing.

Summary

Explore detailed summary information for bearing: S3FC5P25LO2. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: S3FC5P25LO2
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-887-6350
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 01/01/1962

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

0.0230 inches nominal flange width, 0.0002 inches minimum radial and 0.0005 inches maximum radial internal clearance, straight bore shape, 0.2334 inches minimum and 0.2344 inches maximum flange outside diameter, 0.0448 inches minimum and 0.0550 inches maximum bore diameter

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-887-6350 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bore Diameter: 0.0448 inches minimum and 0.0550 inches maximum
Bore Shape: straight
Flange Outside Diameter: 0.2334 inches minimum and 0.2344 inches maximum
Flange Width: 0.0230 inches nominal
Internal Clearance: 0.0002 inches minimum radial and 0.0005 inches maximum radial
Load Direction: radial
Lubrication Material Document And Classification: mil-l-6085 mil spec single material response
Lubrication Material: oil lubricating
Outer Ring Outside Diameter: 0.1873 inches minimum and 0.1875 inches maximum
Overall Width: 0.0771 inches minimum and 0.0781 inches maximum
Material Document And Classification: aisi assn std single material response or sae j405 uns s41000 assn std single material response retainer
Material Document And Classification: aisi assn std single material response or sae j405 uns s44004 assn std single material response ball
Material Document And Classification: aisi assn std single material response or sae j405 uns s44004 assn std single material response inner ring
Material Document And Classification: aisi assn std single material response or sae j405 uns s44004 assn std single material response outer ring
Material: steel comp 440c ball
Material: steel comp 440c outer ring
Material: steel comp 440c inner ring
Material: steel comp 410 retainer
Retainer Fabrication Method: pressed
Specification/Standard Data: 13499-309-1595-000 manufacturers specification control and 10138-10131-302 manufacturers specification control
Standard Tolerance Designation: abec no. 5p
Style Designator: non-loading groove, non-separable
Surface Finish: ground

Replaces

The NSN 3110-00-887-6350 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-227-2191	No Name Available	02/09/1968

Frequently Asked Questions

Find quick answers to common questions about bearing: S3FC5P25LO2. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-887-6350?: The FSCG of the NSN 3110-00-887-6350 is 3110

Does the NSN 3110-00-887-6350 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-887-6350 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-887-6350 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-887-6350 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.