Duplex Ball Bearing
653649-1
(NSN) National Stock Number
3110-01-181-4128
Federal Supply Classification
3110 Unmounted Antifriction Bearings
Item Name Code
30213
Schedule B Code
8482105068
Summary
0.3074 inches minimum and 0.3124 inches maximum overall width, 0.1873 inches minimum and 0.1874 inches maximum bore diameter, 0.4998 inches minimum and 0.5000 inches maximum overall outside diameter, oil lubrication material, g and s section agm65-d end item identification, ground surface finish
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 2 | - | - | 1 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | SB |
Identification
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 30213 | A044A0 | - | 1 |
Specifications
Overall Width
0.3074 inches minimum and 0.3124 inches maximum
Details
An overall measurement taken at right angles to the length of an item,in distinction from thickness.Bore Diameter
0.1873 inches minimum and 0.1874 inches maximum
Details
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.Overall Outside Diameter
0.4998 inches minimum and 0.5000 inches maximum
Details
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.Lubrication Material
oil
Details
The element compound or mixture with which the item is lubricated. please use mrc lbma as a replacement for canceled mrc.End Item Identification
g and s section agm65-d
Details
The national stock number or the identification information of the end equipment for which the item is a part.Surface Finish
ground
Details
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.Retainer Fabrication Method
machined
Details
The means used in manufacturing the retainer.Load Direction
radial
Details
The direction of load with respect to the shaft axis.Internal Clearance
0.0017 inches nominal radial
Details
The clearance between the bearing rings and the rolling elements.Standard Tolerance Designation
abec no. 7p
Details
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.Special Features
precaution shall be taken to prevent contamination or separation of matched pairs
Details
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification on one or more other functions.Lubrication Material Document And Classification
mil-l-6085 mil spec single material response
Details
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.Material
steel comp 410 retainer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 ball
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 inner ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp e52100 outer ring
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
aisi 410 assn std single material response retainer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Style Designator
counterbored outer rings, non-separable, face to face mounting
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 653649-1 | 04614 | 2 | - | 3 | 2 | - | SB |
| G471 | 40920 | 2 | - | 3 | 2 | - | SB |
| R3B36C193-2 | 83086 | 2 | - | 3 | 2 | - | SB |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | U | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 593 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
RAYTHEON COMPANY DBA RAYTHEON DIV RAYTHEON AIRBORNE RADARS
CAGE: 82577
EL SEGUNDO
, CA
, 90245-4501
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3110-01-181-4128
What is the NIIN of the NSN 3110-01-181-4128?
The National Item Identification Number (NIIN) of the NSN 3110-01-181-4128 is 01-181-4128
When the NSN 3110-01-181-4128 was assigned to the Federal Catalog?
It was assigned 40 years ago, on Sat, Jun 9, 1984
Does the NSN 3110-01-181-4128 contain any precious metals?
Type/content is unknown
Does the NSN 3110-01-181-4128 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products