BEARING,SLEEVE
5025246
0.1730 inches nominal first hole diameter, 0.6875 inches nominal overall length, 0.6260 inches minimum and 0.6280 inches maximum body outside diameter, 0.4375 inches nominal body inside diameter, 1.0000 inches nominal flange outside diameter, 0.1275 inches nominal flange width
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 1 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | BF |
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13205 | A045A0 | - | 1 |
Details
The length of a straight line which passes through the center of a hole,and terminates at the circumference.Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Details
The physical configuration of the corner.Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| 1010-502-5246 | A00AM | 9 | - | 6 | 9 | - | YP |
| 005025246 | 73760 | 5 | - | 3 | 2 | - | ZZ |
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
When the NSN 3120-00-502-5246 was assigned to the Federal Catalog?
Does the NSN 3120-00-502-5246 contain any precious metals?
What is the NIIN of the NSN 3120-00-502-5246?
Does the NSN 3120-00-502-5246 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.