BEARING,SLEEVE
HJF342-24C040
(NSN) National Stock Number
3120-01-253-0475
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13205
Schedule B Code
8482997090
Summary
1.2400 inches minimum and 1.2500 inches maximum overall length, 1.7518 inches minimum and 1.7523 inches maximum body outside diameter, 1.5005 inches minimum and 1.5015 inches maximum body inside diameter, 2.2300 inches minimum and 2.2500 inches maximum flange outside diameter, 0.0887 inches minimum and 0.0937 inches maximum flange width, square left flange body corner corner shape
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| 4 | - | - | 5 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 1 | - | - | 9Z |
Identification
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13205 | A045A0 | - | 1 |
Specifications
Overall Length
1.2400 inches minimum and 1.2500 inches maximum
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
1.7518 inches minimum and 1.7523 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
1.5005 inches minimum and 1.5015 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Flange Outside Diameter
2.2300 inches minimum and 2.2500 inches maximum
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.0887 inches minimum and 0.0937 inches maximum
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Corner Shape
square left flange body corner
Details
The physical configuration of the corner.Corner Shape
square left flange outside right corner
Details
The physical configuration of the corner.Corner Shape
square outside right corner
Details
The physical configuration of the corner.Corner Shape
undercut outside left corner
Details
The physical configuration of the corner.Corner Shape
undercut inside left corner
Details
The physical configuration of the corner.Corner Shape
undercut inside right corner
Details
The physical configuration of the corner.Features Provided
casehardened
Details
Those features,not otherwise specified,which may be required for proper functioning of the item.Hardness Rating
28.0 rockwell c minimum and 37.0 rockwell c maximum outer layer
Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Surface Finish
125.0 microinches right end surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
125.0 microinches right end surface of left flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
125.0 microinches outside diameter surface of flange
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Surface Finish
63.0 microinches outside diameter surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Functional Description
high load-low speed airframe use
Details
Describes the capabilities,intended use,and/or purpose for which the item is provided.Material
plastic polytetrafluoroethylene inner layer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
plastic polytetrafluoroethylene left end surface of flange
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
steel comp 630 outer layer
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
ams 5643 assn std single material response outer layer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
nomex-polytetrafluoroethylene fabric mfr ref single material response left end surface of flange
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
nomex-polytetrafluoroethylene fabric mfr ref single material response inner layer
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Reference Data And Literature
mil-std-1599 load speed and wear/life cond
Details
Literature and references available for information pertaining to the item.Style Designator
solid, external flange one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Supplementary Features
-65.0 deg f to 325.0 deg f temp range use
Details
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.Specification/Standard Data
81343-as81934/2 government specification
Details
The document designator of the specification or standard which established the item of supply.Master-Cross Reference List
| Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
|---|---|---|---|---|---|---|---|
| KDJ24C040-342 | 97613 | 4 | - | 5 | 1 | - | 9Z |
| AHJF24C040 | 50294 | 4 | - | 5 | 1 | - | 9Z |
| 07-282-24C040 | 09455 | 4 | - | 5 | 1 | - | 9Z |
| KRJ24UDSB-040M | 50632 | 4 | - | 5 | 1 | - | 9Z |
| FBRR-24-C-040 | 73134 | 4 | - | 5 | 1 | - | 9Z |
| FBJW48TH-24C040M | 3NPS1 | 5 | - | 5 | 1 | - | ZZ |
| ADLF24C040 | 15860 | 4 | - | 5 | 1 | - | 9Z |
| FBJW48TH-24C040M | 21335 | 4 | - | 5 | 9 | - | 9Z |
| AS81934/2 | 0U583 | E | - | 5 | 1 | - | ZZ |
| M81934/2-24C040 | 0U583 | E | - | 3 | 2 | - | ZZ |
| AS81934/2 | 81343 | E | - | 5 | 9 | - | ZZ |
| M81934/2-24C040 | 81343 | E | - | 3 | 9 | - | ZZ |
| M81934/2-24C040 | 81349 | 4 | - | 5 | 9 | - | 9Z |
| MIL-B-81934/2 | 81349 | 4 | - | 5 | 9 | - | 9Z |
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
U S BEARINGS
CAGE: 02758
BALDWIN PARK
, CA
, 91706-1424
UNITED STATES
FAQs
Frequently asked questions for NSN 3120-01-253-0475
When the NSN 3120-01-253-0475 was assigned to the Federal Catalog?
It was assigned 37 years ago, on Sat, Apr 11, 1987
Does the NSN 3120-01-253-0475 contain any precious metals?
Does not contain precious metal
What is the NIIN of the NSN 3120-01-253-0475?
The National Item Identification Number (NIIN) of the NSN 3120-01-253-0475 is 01-253-0475
Does the NSN 3120-01-253-0475 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.
Similar Products
BEARING,SLEEVE
3120-01-253-0475
KDJ24C040-342
SARGENT AEROSPACE & DEFENSE, LLC DBA KAHR BEARING
BEARING,SLEEVE
3120-01-253-0475
AHJF24C040
NEW HAMPSHIRE BALL BEARINGS INC DIV PRECISION DIVISION
BEARING,SLEEVE
3120-01-253-0475
07-282-24C040
RBC TRANSPORT DYNAMICS CORP DIV RBC TRANSPORT DYNAMICS
BEARING,SLEEVE
3120-01-253-0475
KRJ24UDSB-040M
KAMATICS CORPORATION
BEARING,SLEEVE
3120-01-253-0475
FBRR-24-C-040
ROLLER BEARING CO OF AMERICA INC
BEARING,SLEEVE
3120-01-253-0475
FBJW48TH-24C040M
RBC AIRCRAFT PRODUCTS, INC.
BEARING,SLEEVE
3120-01-253-0475
ADLF24C040
NEW HAMPSHIRE BALL BEARINGS INC DIV ASTRO DIVISION
BEARING,SLEEVE
3120-01-253-0475
FBJW48TH-24C040M
TIMKEN CO DIV THE TIMKEN COMPANY
BEARING,SLEEVE
3120-01-253-0475
AS81934/2
SAE INTERNATIONAL
BEARING,SLEEVE
3120-01-253-0475
M81934/2-24C040
SAE INTERNATIONAL
BEARING,SLEEVE
3120-01-253-0475
AS81934/2
SOCIETY OF AUTOMOTIVE ENGINEERS INC
BEARING,SLEEVE
3120-01-253-0475
M81934/2-24C040
SOCIETY OF AUTOMOTIVE ENGINEERS INC
BEARING,SLEEVE
3120-01-253-0475
M81934/2-24C040
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
BEARING,SLEEVE
3120-01-253-0475
MIL-B-81934/2
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M