BEARING,SLEEVE
SFJ06A-129
(NSN) National Stock Number
3120-01-297-1795
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13205
Schedule B Code
8482997090
Summary
0.1550 inches nominal overall length, 0.5007 inches minimum and 0.5017 inches maximum body outside diameter, 0.3755 inches minimum and 0.3765 inches maximum body inside diameter, 0.8650 inches nominal flange outside diameter, 0.0575 inches minimum and 0.0625 inches maximum flange width, square all corners corner shape
| DAC | HCC | DMIL | RNCC |
|---|---|---|---|
| A | - | - | 3 |
| RNVC | SADC | MSDS | RNAAC |
|---|---|---|---|
| 2 | - | - | KZ |
Identification
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.
| INC | FIIG | Concept | Condition |
|---|---|---|---|
| 13205 | A045A0 | - | 1 |
Specifications
Overall Length
0.1550 inches nominal
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Body Outside Diameter
0.5007 inches minimum and 0.5017 inches maximum
Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Body Inside Diameter
0.3755 inches minimum and 0.3765 inches maximum
Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Flange Outside Diameter
0.8650 inches nominal
Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Flange Width
0.0575 inches minimum and 0.0625 inches maximum
Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Corner Shape
square all corners
Details
The physical configuration of the corner.Surface Finish
32.0 microinches outside diameter surface of body
Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Material
aluminum alloy 7075 outside diameter surface of body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
aluminum alloy 7075 outside diameter surface of flange
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
aluminum alloy 7075 right end surface of body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
aluminum alloy 7075 right end surface of left flange
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
plastic acetal inside diameter surface of body
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material
plastic acetal left end surface of body and flange
Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Material Document And Classification
qq-a-225/9 fed spec single material response outside diameter surface of body or qq-a-200/11 fed spec single material response outside diameter surface of body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-225/9 fed spec single material response outside diameter surface of flange or qq-a-200/11 fed spec single material response outside diameter surface of flange
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-225/9 fed spec single material response right end surface of body or qq-a-200/11 fed spec single material response right end surface of body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
qq-a-225/9 fed spec single material response right end surface of left flange or qq-a200/11 fed spec single material response right end surface of left flange
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
speclon sps 001,cagec 16746 mfr ref single material response inside diameter surface of body
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Material Document And Classification
speclon sps 001,cagec 16746 mfr ref single material response left end surface of body and flange
Details
The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.Surface Treatment
anodize outside diameter surface of body or chromate outside diameter surface of body
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
anodize outside diameter surface of flange or chromate outside diameter surface of flange
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
anodize right end surface of left flange or chromate right end surface of left flange
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment
anodize right end surface of body or chromate right end surface of body
Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Surface Treatment Document And Classification
mil-a-8625,type 2 mil spec 1st treatment response outside diameter surface of body or mil-c-5541 mil spec 2nd treatment response outside diameter surface of body
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
mil-a-8625,type 2 mil spec 1st treatment response outside diameter surface of flange or mil-c-5541 mil spec 2nd treatment response outside diameter surface of flange
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
mil-a-8625,type 2 mil spec 1st treatment response right end surface of body or mil-c-5541 mil spec 2nd treatment response right end surface of body
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Surface Treatment Document And Classification
mil-a-8625,type 2 mil spec 1st treatment response right end surface of left flange or mil-c-5541 mil spec 2nd treatment response right end surface of left flange
Details
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.Style Designator
solid, external flange one end
Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
| HMIC | PMIC | ESD/EMI | Criticality |
|---|---|---|---|
| N | A | - | - |
Freight
Universal / National Freight and Handling Information
| UFC | HMC | LTL | LCL |
|---|---|---|---|
| 58860 | - | P | - |
| RVC | WCC | TCC | SHC |
|---|---|---|---|
| - | 742 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
Manufacturer
SPECLINE INC
CAGE: 16746
CARSON CITY
, NV
, 89706-0445
UNITED STATES
FAQs
Frequently asked questions for NSN 3120-01-297-1795
When the NSN 3120-01-297-1795 was assigned to the Federal Catalog?
It was assigned 35 years ago, on Thu, Mar 30, 1989
Does the NSN 3120-01-297-1795 contain any precious metals?
Does not contain precious metal
What is the NIIN of the NSN 3120-01-297-1795?
The National Item Identification Number (NIIN) of the NSN 3120-01-297-1795 is 01-297-1795
Does the NSN 3120-01-297-1795 contain any hazardous material?
No data in HMIRS
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.