BUSHING,SLEEVE
3120000866876
0.4000 inches minimum and 0.4100 inches maximum overall length, 0.2700 inches minimum and 0.2800 inches maximum body outside diameter, 0.1250 inches minimum and 0.1270 inches maximum body inside diameter, 0.8250 inches minimum and 0.8350 inches maximum flange outside diameter, 0.0570 inches minimum and 0.0620 inches maximum flange width, grooved circular lubricant accommodation style
DAC | HCC | DMIL | RNCC |
---|---|---|---|
9 | - | - | 6 |
RNVC | SADC | MSDS | RNAAC |
---|---|---|---|
9 | - | - | YP |
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.
INC | FIIG | Concept | Condition |
---|---|---|---|
13206 | A045A0 | - | 2 |
Details
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.Details
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.Details
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.Details
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.Details
A measurement taken at right angles to the length of a flange,in distinction from thickness.Details
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.Details
The physical configuration of the corner.Details
The physical configuration of the corner.Details
The physical configuration of the corner.Details
The physical configuration of the corner.Details
The physical configuration of the corner.Details
The physical configuration of the corner.Details
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.Details
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.Details
Indicates the location and number of grooves on the surface of the item.Details
The chemical compound or mechanical mixture properties of which the item is fabricated.Details
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.Details
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.Part | CAGE | DAC | HCC | RNCC | RNVC | MSDS | RNAAC |
---|---|---|---|---|---|---|---|
3120000866876 | SCY13 | 9 | - | 5 | 9 | - | YP |
8769133 | 19206 | 1 | - | 3 | 2 | - | BF |
HMIC | PMIC | ESD/EMI | Criticality |
---|---|---|---|
N | A | - | - |
UFC | HMC | LTL | LCL |
---|---|---|---|
59240 | - | R | - |
RVC | WCC | TCC | SHC |
---|---|---|---|
- | 713 | Z | 9 |
Certified Supplier
Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.
- ISO9001 / AS9100 Quality Standards
- HAZMAT Certified
- On Time Delivery
- Qualified Sales Team
- Counterfeit Parts Prevention
- 100% Product Inspections
When the NSN 3120-00-086-6876 was assigned to the Federal Catalog?
Does the NSN 3120-00-086-6876 contain any precious metals?
What is the NIIN of the NSN 3120-00-086-6876?
Does the NSN 3120-00-086-6876 contain any hazardous material?
Can't Find It
If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.