Sleeve Bushing

540-011-161-3

540-011-161-3
(NSN) National Stock Number
3120-00-905-7579
Federal Supply Classification
3120 Unmounted Plain Bearings
Item Name Code
13206
Schedule B Code
8482997060
Summary

1.3550 inches minimum and 1.3600 inches maximum overall length, 1.5070 inches minimum and 1.5075 inches maximum body outside diameter, 1.2100 inches minimum and 1.2300 inches maximum body inside diameter, chamfered outside left corner corner shape, chamfered outside right corner corner shape, square inside left corner corner shape

DAC HCC DMIL RNCC
X - - 3
RNVC SADC MSDS RNAAC
2 - - XX
Identification

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

INC FIIG Concept Condition
13206 A045A0 - 2
Specifications
Overall Length
1.3550 inches minimum and 1.3600 inches maximum
Details The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
Body Outside Diameter
1.5070 inches minimum and 1.5075 inches maximum
Details The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
Body Inside Diameter
1.2100 inches minimum and 1.2300 inches maximum
Details The length of a straight line which passes through the center of a body,and terminates at the inside circumference.
Corner Shape
chamfered outside left corner
Details The physical configuration of the corner.
Corner Shape
chamfered outside right corner
Details The physical configuration of the corner.
Corner Shape
square inside left corner
Details The physical configuration of the corner.
Corner Shape
square inside right corner
Details The physical configuration of the corner.
Surface Finish
63.0 microinches intermediate layer
Details Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.
Material
steel overall
Details The chemical compound or mechanical mixture properties of which the item is fabricated.
Material Document And Classification
qq-s-763 fed spec single material response overall
Details The specification, standard, or manufacturer's reference and the classification designation, such as class, condition, temper, and the like, that identifies the material.
Surface Treatment
passivate overall
Details The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
Surface Treatment Document And Classification
540-011-161-3,97499 mfr ref single treatment response overall
Details The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
Style Designator
solid, plain, no outside flanges
Details The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
Test Data Document
97499-bps4075 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 81349- mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.).
Details The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
Master-Cross Reference List
Part CAGE DAC HCC RNCC RNVC MSDS RNAAC
540-011-161-3 80070 5 - 5 9 - ZZ
Material and Special Handling
Hazardous material, precious metals, criticality, and electrostatic discharge indicators.
HMIC PMIC ESD/EMI Criticality
N A - -
Freight
Universal / National Freight and Handling Information
UFC HMC LTL LCL
59240 - R -
RVC WCC TCC SHC
- 713 Z 9

Certified Supplier

Order with confidence, we are a valued certified supplier serving customers in the military and aerospace industries.

  • ISO9001 / AS9100 Quality Standards
  • HAZMAT Certified
  • On Time Delivery
  • Qualified Sales Team
  • Counterfeit Parts Prevention
  • 100% Product Inspections
Manufacturer
BELL TEXTRON INC
CAGE: 97499
FORT WORTH , TX , 76118
UNITED STATES
View Products
FAQs
Frequently asked questions for NSN 3120-00-905-7579
What is the NIIN of the NSN 3120-00-905-7579?
The National Item Identification Number (NIIN) of the NSN 3120-00-905-7579 is 00-905-7579
When the NSN 3120-00-905-7579 was assigned to the Federal Catalog?
It was assigned 64 years ago, on Fri, Jan 1, 1960
Does the NSN 3120-00-905-7579 contain any precious metals?
Does not contain precious metal
Does the NSN 3120-00-905-7579 contain any hazardous material?
No data in HMIRS

Can't Find It

If you didn't find what you need, don't worry, we're here to help! Our team is ready to help you find exactly what you need. Click below to contact us.

Similar Products
Who we are?

Founded in the heart of North Florida, our company has been dedicated to commercializing and supplying top-quality aerospace and milspec bearings.

Contact
841 Prudential Drive
Jacksonville, FL, 32207
United States
© 2024 Aerospace and Milspec Bearings, Inc. All rights reserved.
Made in USA