3130-00-438-8996 Roller Bearing Unit
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3130-00-438-8996.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3130-00-438-8996. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3130 المحامل المركبة
- (NSN) رقم المخزون الوطني
- 3130-00-438-8996
- اسم العنصر الكود
- 30558
- دليل تحديد العناصر الفيدرالية
- A093A0
- تاريخ التعيين
- 11/26/1969
وحدة مجمعة مكونة من غلاف يحتوي على محمل أسطواني أحادي أو متعدد الصفوف، مصمم لتلبية ظروف تركيب مختلفة أو محددة.
7.5000 inches nominal bolt circle diameter, fixed block type, self-aligning alignment type, 3.0000 inches nominal bore diameter, 4.0312 inches nominal assembly overall length
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3130-00-438-8996 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- نوع المحاذاة
- self-aligning
- الطول الإجمالي للتجميع
- 4.0312 inches nominal
- نوع الكتلة
- fixed
- قطر دائرة البراغي
- 7.5000 inches nominal
- قطر التجويف
- 3.0000 inches nominal
- موقع الطوق
- one end
- الميزات المقدمة
- ground rolling element groove
- قطر الغلاف
- 8.7500 inches nominal
- طول السكن
- 3.1875 inches nominal
- تسمية التجهيز الداخلي
- standard
- نوع قدرة التحميل
- radial and thrust
- مادة التشحيم
- grease
- زاوية تركيب التشحيم من خط الوسط الأفقي
- 90.0 degrees nominal
- نوع تركيب التشحيم
- hydraulic
- مادة
- iron cast housing
- مادة
- rubber and steel seal
- مادة
- steel bearing surface
- قطر فتحة التركيب
- 0.6250 inches nominal
- نوع فتحة التركيب
- round, unthreaded
- قطر الطيار
- 6.3730 inches minimum and 6.3750 inches maximum
- كمية أخدود عنصر التدحرج
- 2
- طريقة قفل العنصر الدوار
- setscrew locking collar
- موقع الختم
- both ends
- نوع الختم
- contact
- نوع نهاية العمود
- open
- الميزات الخاصة
- furnished with steel labyrinth seal at flang end and rubber contact seal at pilot end
- مُحدد الأسلوب
- flange cartridge block
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
| رقم القطعة | اسم |
|---|---|
| BS214184 | Roller Bearing Unit |
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3130-00-438-8996. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3130-00-438-8996?
- The FSCG of the NSN 3130-00-438-8996 is 3130
- Does the NSN 3130-00-438-8996 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3130-00-438-8996 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3130-00-438-8996 contain precious materials?
- Precious metal content is unknown
- Does NSN 3130-00-438-8996 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3130-00-438-8996 was assigned to the Federal Catalog?
- It was assigned منذ 56 سنة, on Wed, Nov 26, 1969