6420086 Ball Bearing Unit
المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 6420086 Ball Bearing Unit.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 6420086. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- رقم القطعة
- 6420086
- تصنيف الإمدادات الفيدرالية
- 3130 المحامل المركبة
- (NSN) رقم المخزون الوطني
- 3130-01-022-2104
- اسم العنصر الكود
- 30556
- دليل تحديد العناصر الفيدرالية
- A093A0
- تاريخ التعيين
- 05/26/1976
وحدة مجمعة مكونة من غلاف يحتوي على محمل كروي صف واحد أو متعدد، مصمم لتلبية شروط التركيب المختلفة أو المحددة.
fixed block type, 3.0000 inches nominal bolt circle diameter, 1.3438 inches nominal assembly overall length, self-aligning alignment type, 1.0000 inches nominal bore diameter
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3130-01-022-2104 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- نوع المحاذاة
- self-aligning
- الطول الإجمالي للتجميع
- 1.3438 inches nominal
- نوع الكتلة
- fixed
- قطر دائرة البراغي
- 3.0000 inches nominal
- قطر التجويف
- 1.0000 inches nominal
- موقع الطوق
- one end
- الميزات المقدمة
- ground rolling element groove
- سمك الشفة
- 0.4219 inches nominal
- قطر الغلاف
- 2.7188 inches nominal
- طول السكن
- 0.7812 inches nominal
- تسمية التجهيز الداخلي
- standard
- نوع قدرة التحميل
- radial and thrust
- مادة التشحيم
- grease
- زاوية تركيب التشحيم من خط الوسط الأفقي
- 45.0 degrees nominal
- نوع تركيب التشحيم
- hydraulic
- القطر الخارجي الكلي
- 3.7500 inches nominal
- وثيقة المواد والتصنيف
- sae assn std single material response bearing
- مادة
- iron malleable housing
- مادة
- rubber synthetic and steel seal
- مادة
- steel comp e52100 bearing
- نوع فتحة التركيب
- square
- عرض فتحة التركيب
- 0.3438 inches minimum
- كمية أخدود عنصر التدحرج
- 1
- طريقة قفل العنصر الدوار
- setscrew locking collar
- موقع الختم
- both ends
- نوع الختم
- contact
- نوع نهاية العمود
- open
- مُحدد الأسلوب
- flange block
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 6420086. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3130-01-022-2104?
- The FSCG of the NSN 3130-01-022-2104 is 3130
- Does the NSN 3130-01-022-2104 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482991050
- Does NSN 3130-01-022-2104 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3130-01-022-2104 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3130-01-022-2104 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3130-01-022-2104 was assigned to the Federal Catalog?
- It was assigned منذ 50 سنة, on Wed, May 26, 1976