3110-00-157-6105 Annular Ball Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3110-00-157-6105.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3110-00-157-6105. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3110 محامل مضادة للاحتكاك غير مثبتة
- (NSN) رقم المخزون الوطني
- 3110-00-157-6105
- اسم العنصر الكود
- 00014
- دليل تحديد العناصر الفيدرالية
- A044A0
- تاريخ التعيين
- 01/01/1961
جهاز أسطواني تدور فيه الحلقة الداخلية أو الخارجية على صف واحد أو صفين من الكرات المقواة التي تتدحرج بسهولة بين الحلقتين، مما يقلل الاحتكاك. للقطع ذات الأسطح المصقولة خصيصًا للتركيب المزدوج، انظر: محمل، كرة، مزدوج. لا يشمل: محمل، كرة، هيكل الطائرة.
2.0600 inches minimum and 2.0650 inches maximum flange outside diameter, 1.3750 inches minimum and 1.3830 inches maximum bore diameter, straight bore shape, 1.2500 inches nominal effective length, 25.0 degrees nominal contact angle
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3110-00-157-6105 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- الطول الفعال
- 1.2500 inches nominal
- قطر التجويف
- 1.3750 inches minimum and 1.3830 inches maximum
- شكل التجويف
- straight
- زاوية الاتصال
- 25.0 degrees nominal
- القطر الخارجي للشفة
- 2.0600 inches minimum and 2.0650 inches maximum
- قطر الأخدود
- 1.6200 inches minimum and 1.6230 inches maximum
- عرض الأخدود
- 0.5100 inches minimum and 0.5150 inches maximum
- اتجاه التحميل
- angular
- مادة التشحيم
- grease
- وثيقة وتصنيف مواد التشحيم
- dod-g-24508 mil spec single material response
- الطول الإجمالي
- 1.8750 inches nominal
- القطر الخارجي الكلي
- 2.8125 inches nominal
- مادة
- steel overall
- طريقة تصنيع المثبت
- pressed
- الميزات الخاصة
- banded od
- مُحدد الأسلوب
- clutch release, integral inner ring w/fork groove, slider type
- تشطيب السطح
- ground
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
| رقم القطعة | اسم |
|---|---|
| 208CTC | Annular Ball Bearing |
| 6538 | Annular Ball Bearing |
| 700190 | Annular Ball Bearing |
| 908092 | Annular Ball Bearing |
| 909422 | Annular Ball Bearing |
| A900 | Annular Ball Bearing |
| CB1086C | Annular Ball Bearing |
| CB1096C | Annular Ball Bearing |
| CT1086H | Annular Ball Bearing |
| CT22 | Annular Ball Bearing |
| CT22X1B | Annular Ball Bearing |
| N1086 | Annular Ball Bearing |
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3110-00-157-6105. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3110-00-157-6105?
- The FSCG of the NSN 3110-00-157-6105 is 3110
- Does the NSN 3110-00-157-6105 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482105028
- Does NSN 3110-00-157-6105 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-157-6105 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-157-6105 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-157-6105 was assigned to the Federal Catalog?
- It was assigned منذ 65 سنة, on Sun, Jan 1, 1961