What is the FSCG of the NSN 3110-00-179-7397?

The FSCG of the NSN 3110-00-179-7397 is 3110

Does the NSN 3110-00-179-7397 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105068

Does NSN 3110-00-179-7397 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-179-7397 contain precious materials?

Item does not contain precious metal.

Does NSN 3110-00-179-7397 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-179-7397 was assigned to the Federal Catalog?

It was assigned منذ 56 سنة, on Fri, Apr 25, 1969

M7206PW4NGSRDUE8382 | Aerospace-Bearing

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: M7206PW4NGSRDUE8382. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة: M7206PW4NGSRDUE8382
تصنيف الإمدادات الفيدرالية: 3110 محامل مضادة للاحتكاك غير مثبتة
(NSN) رقم المخزون الوطني: 3110-00-179-7397
اسم العنصر الكود: 30213
دليل تحديد العناصر الفيدرالية: A044A0
تاريخ التعيين: 04/25/1969

محملان كرويان حلقان أحاديا الصف، مُختاران أبعاديًا ليكونا زوجًا أو مجموعة متطابقة. صُقلت أسطح الحلقات خصيصًا لإزاحات محددة تُنتج حملًا مسبقًا مُحددًا مسبقًا عند التركيب. قد يتضمن محمل تلامس زاوي أحادي الصف بأسطح مصقولة خصيصًا للتركيب المزدوج.

1.1809 inches minimum and 1.1811 inches maximum bore diameter, 0.0002 inches maximum axial internal clearance, 1.2398 inches minimum and 1.2598 inches maximum overall width, angular load direction, 2.4405 inches minimum and 2.4409 inches maximum overall outside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3110-00-179-7397 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

قطر التجويف: 1.1809 inches minimum and 1.1811 inches maximum
التخليص الداخلي: 0.0002 inches maximum axial
اتجاه التحميل: angular
القطر الخارجي الكلي: 2.4405 inches minimum and 2.4409 inches maximum
العرض الكلي: 1.2398 inches minimum and 1.2598 inches maximum
وثيقة المواد والتصنيف: unable to decode
مادة: unable to decode
طريقة تصنيع المثبت: machined
تعيين التسامح القياسي: abec no.3
مُحدد الأسلوب: counterbored outer rings, non-separable, back to back mounting
تشطيب السطح: ground
وثيقة بيانات الاختبار: "21335-aps-36a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 21335-aps-33a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47162a7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47163a7 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 52676-a47168 1 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: M7206PW4NGSRDUE8382. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3110-00-179-7397?: The FSCG of the NSN 3110-00-179-7397 is 3110

Does the NSN 3110-00-179-7397 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105068

Does NSN 3110-00-179-7397 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-179-7397 contain precious materials?: Item does not contain precious metal.

Does NSN 3110-00-179-7397 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.