3110-00-405-4639 Annular Ball Bearing

المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3110-00-405-4639.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 3110-00-405-4639. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

تصنيف الإمدادات الفيدرالية
3110 محامل مضادة للاحتكاك غير مثبتة
(NSN) رقم المخزون الوطني
3110-00-405-4639
اسم العنصر الكود
00014
دليل تحديد العناصر الفيدرالية
A044A0
تاريخ التعيين
04/14/1971

جهاز أسطواني تدور فيه الحلقة الداخلية أو الخارجية على صف واحد أو صفين من الكرات المقواة التي تتدحرج بسهولة بين الحلقتين، مما يقلل الاحتكاك. للقطع ذات الأسطح المصقولة خصيصًا للتركيب المزدوج، انظر: محمل، كرة، مزدوج. لا يشمل: محمل، كرة، هيكل الطائرة.

1.3780 inches nominal bore diameter, angular load direction, straight bore shape, 0.0005 inches minimum radial and 0.0008 inches maximum radial internal clearance, 12.0 degrees nominal contact angle

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3110-00-405-4639 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

قطر التجويف
1.3780 inches nominal
شكل التجويف
straight
زاوية الاتصال
12.0 degrees nominal
التخليص الداخلي
0.0005 inches minimum radial and 0.0008 inches maximum radial
اتجاه التحميل
angular
القطر الخارجي الكلي
2.1654 inches nominal
العرض الكلي
0.3937 inches nominal
وثيقة المواد والتصنيف
astm b147,81346 assn std single material response retainer
وثيقة المواد والتصنيف
fed-std-66 fed std single material response inner ring
وثيقة المواد والتصنيف
fed-std-66 fed std single material response ball
وثيقة المواد والتصنيف
fed-std-66 fed std single material response outer ring
مادة
copper alloy 864 retainer
مادة
steel comp e51100 ball
مادة
steel comp e52100 inner ring
مادة
steel comp e52100 outer ring
طريقة تصنيع المثبت
machined
تعيين التسامح القياسي
abec no.3
الميزات الخاصة
stabilized for operation at m65 to p275 deg f,c scale 58 min rockwell hardness balls,inner and outer rings,surface finish id inner ring and od outer ring 16 microinches aa,raceways 8 microinches aa,inner ring od 20 microinches aa,id outer ring 125 microinches aa,ring faces 32 microinches aa,retainer 63 microinches aa
مُحدد الأسلوب
counterbored outer ring, non-separable
تشطيب السطح
ground
وثيقة بيانات الاختبار
"81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

يستبدل

The NSN 3110-00-405-4639 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3110-01-457-5991 No Name Available 08/01/1999

المحامل ذات الصلة

استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.

رقم القطعة اسم
1907R4 Annular Ball Bearing
2M9307WIMBRE9076 Annular Ball Bearing
59636 Annular Ball Bearing

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3110-00-405-4639. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3110-00-405-4639?
The FSCG of the NSN 3110-00-405-4639 is 3110
Does the NSN 3110-00-405-4639 have a Schedule B code assigned?
Yes, the Schedule B code is 8482105028
Does NSN 3110-00-405-4639 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3110-00-405-4639 contain precious materials?
Precious metal content is unknown
Does NSN 3110-00-405-4639 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3110-00-405-4639 was assigned to the Federal Catalog?
It was assigned منذ 55 سنة, on Wed, Apr 14, 1971

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 3110-00-405-4639

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

521-1311200PC108
3120-00-965-7030
Sleeve Bearing
521-1311221PC60
3120-00-017-6082
Sleeve Bearing
521-1929065PC49
3120-01-195-3027
Sleeve Bushing
521-1929066 PC40
3120-01-195-3028
Sleeve Bushing
521-1929066 PIE
3120-00-941-2260
Sleeve Bearing
521-1929085 PIECE 19
3120-01-204-4795
Sleeve Bearing
521-1929085 PIECE 7
3120-01-204-4796
Sleeve Bearing
521-2025542 PC 6
3110-00-065-2029
Needle Roller Bearing
521-2026075PC35
3110-00-997-0130
Bearing
521-2026075PC8
3120-00-988-9618
Sleeve Bushing
521-2026432 PC 3
3110-00-065-2029
Needle Roller Bearing
521-207-080-100-000
3120-00-571-5787
Sleeve Bushing
521-207-310-660-000
3120-00-783-2054
Sleeve Bearing
521-207-410-660-000
3120-01-366-3636
Sleeve Bushing
521-208-020-100-000
3120-00-740-7614
Sleeve Bushing