3110-00-666-5850 Rod End Ball Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3110-00-666-5850.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3110-00-666-5850. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3110 محامل مضادة للاحتكاك غير مثبتة
- (NSN) رقم المخزون الوطني
- 3110-00-666-5850
- اسم العنصر الكود
- 00049
- دليل تحديد العناصر الفيدرالية
- A044A0
- تاريخ التعيين
- 01/01/1963
محمل كروي خاص أحادي أو متعدد الصفوف، صلب أو ذاتي المحاذاة، ومصنوع من ساق صلبة أو مجوفة، ملولبة داخليًا أو خارجيًا.
0.1900 inches nominal bore diameter, mil-g-23827 mil spec single material response lubrication material document and classification, self-aligning alignment type, 0.5000 inches nominal inner ring width, 1.3750 inches nominal length from bore center to shank end
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3110-00-666-5850 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- نوع المحاذاة
- self-aligning
- قطر التجويف
- 0.1900 inches nominal
- عرض الحلقة الداخلية
- 0.5000 inches nominal
- الطول من مركز التجويف إلى نهاية الساق
- 1.3750 inches nominal
- وثيقة وتصنيف مواد التشحيم
- mil-g-23827 mil spec single material response
- مادة التشحيم
- grease
- عرض الحلقة الخارجية
- 0.3281 inches nominal
- الطول الإجمالي
- 1.7660 inches nominal
- القطر الخارجي الكلي
- 0.7813 inches nominal
- مادة
- steel ball
- مادة
- steel corrosion resisting shield
- مادة
- steel inner ring
- مادة
- steel outer ring
- مادة
- steel shaft
- حجم الخيط الاسمي
- 0.250 inches
- زاوية المحاذاة الذاتية
- 10.00 degrees nominal
- موقع المحاذاة الذاتية
- internal
- قطر الساق
- 0.3750 inches nominal
- نمط الساق
- internally threaded w/hexagon end
- طول خيط الساق
- 0.8125 inches nominal
- كمية الدرع
- 2
- العرض عبر الشقق
- 0.3770 inches nominal
- مُحدد الأسلوب
- double row, staggered, ball
- معالجة السطح
- cadmium all external/exposed metal surfaces
- فئة الخيط
- 3b
- اتجاه الخيط
- right-hand
- كمية الخيوط لكل بوصة
- 28
- مُعَيِّن سلسلة الخيوط
- unf
يستبدل
The NSN 3110-00-666-5850 is used in place of the following discontinued or alternate items:
| NSN | اسم | تاريخ |
|---|---|---|
| 3110-00-618-0867 | No Name Available | 09/11/1970 |
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
| رقم القطعة | اسم |
|---|---|
| 3110PL0927897 | Rod End Ball Bearing |
| 6828145 | Rod End Ball Bearing |
| REP3F4-003JA | Rod End Ball Bearing |
| REP3F4-5-E9642- TZ199-S8 | Rod End Ball Bearing |
| REP3F4-5E9642 | Rod End Ball Bearing |
| REP3F4-5FS210 | Rod End Ball Bearing |
| REP3F4-5FS210MILG3278 | Rod End Ball Bearing |
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3110-00-666-5850. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3110-00-666-5850?
- The FSCG of the NSN 3110-00-666-5850 is 3110
- Does the NSN 3110-00-666-5850 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482800080
- Does NSN 3110-00-666-5850 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-666-5850 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3110-00-666-5850 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-666-5850 was assigned to the Federal Catalog?
- It was assigned منذ 63 سنة, on Tue, Jan 1, 1963