DP39B Airframe Roller Bearing
المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: DP39B Airframe Roller Bearing.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: DP39B. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- رقم القطعة
- DP39B
- تصنيف الإمدادات الفيدرالية
- 3110 محامل مضادة للاحتكاك غير مثبتة
- (NSN) رقم المخزون الوطني
- 3110-00-779-6413
- اسم العنصر الكود
- 00046
- دليل تحديد العناصر الفيدرالية
- A044A0
- تاريخ التعيين
- 01/01/1963
قطعة أسطوانية تدور فيها الحلقة الداخلية أو الخارجية على صف أو صفوف من بكرات مُصلدة، حيث تتدحرج المحامل على مسار مُحدد، مما يُقلل الاحتكاك. تتميز هذه القطع بخصائصها المقاومة للتآكل، وخفة وزنها، وأبعادها بالبوصة بدلاً من النظام المتري، وحلقاتها الداخلية التي تبرز عادةً خارج نطاق الحلقة الخارجية، أو حلقة داخلية ضيقة جدًا ذات قطر خارجي أكبر قليلاً من قطر التجويف. صُممت هذه القطعة أساسًا للاستخدام في تجميعات الطائرات، مثل أنظمة التحكم وأسطح الطائرات. لا يشمل: المحامل، البكرات، الأسطوانات.
mil-g-23827 mil spec single material response lubrication material document and classification, grease lubrication material, 1.0000 inches nominal inner ring width, contact bearing seal type, 2.4375 inches nominal bore diameter
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3110-00-779-6413 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- نوع ختم المحمل
- contact
- قطر التجويف
- 2.4375 inches nominal
- عرض الحلقة الداخلية
- 1.0000 inches nominal
- وثيقة وتصنيف مواد التشحيم
- mil-g-23827 mil spec single material response
- مادة التشحيم
- grease
- عرض الحلقة الخارجية
- 0.9550 inches nominal
- القطر الخارجي الكلي
- 3.3125 inches nominal
- مادة
- rubber synthetic seal
- مادة
- steel inner ring
- مادة
- steel outer ring
- مادة
- steel retainer
- مادة
- steel roller
- الميزات الخاصة
- 2 deg self alignment in either direction,lubricant hole and groove in od of outer ring,seals staked in with 16 one-eight in. stakes under 9000 lbs pressure
- كمية الختم
- 2
- مُحدد الأسلوب
- concave rollers, double closure, self aligning
- معالجة السطح
- cadmium all external/exposed metal surfaces
يستبدل
The NSN 3110-00-779-6413 is used in place of the following discontinued or alternate items:
| NSN | اسم | تاريخ |
|---|---|---|
| 3110-00-293-8653 | No Name Available | 07/08/1973 |
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: DP39B. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3110-00-779-6413?
- The FSCG of the NSN 3110-00-779-6413 is 3110
- Does the NSN 3110-00-779-6413 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482800080
- Does NSN 3110-00-779-6413 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3110-00-779-6413 contain precious materials?
- Precious metal content is unknown
- Does NSN 3110-00-779-6413 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3110-00-779-6413 was assigned to the Federal Catalog?
- It was assigned منذ 63 سنة, on Tue, Jan 1, 1963