3120-00-003-6724 Rod End Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-00-003-6724.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-00-003-6724. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-00-003-6724
- اسم العنصر الكود
- 13209
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 05/26/1972
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.
0.2810 inches nominal inspection hole center to end distance, 0.9690 inches minimum and 1.0310 inches maximum bore center to shank end distance, 0.2450 inches minimum and 0.2500 inches maximum inner member width, 0.1895 inches minimum and 0.1915 inches maximum bore diameter, flush lubrication fitting features provided
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-003-6724 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- قطر التجويف
- 0.1895 inches minimum and 0.1915 inches maximum
- المسافة من مركز التجويف إلى نهاية الساق
- 0.9690 inches minimum and 1.0310 inches maximum
- الميزات المقدمة
- flush lubrication fitting
- عرض العضو الداخلي
- 0.2450 inches minimum and 0.2500 inches maximum
- المسافة من مركز فتحة التفتيش إلى النهاية
- 0.2810 inches nominal
- ميزة التزييت
- groove external inner member
- الطول الإجمالي
- 1.2810 inches nominal
- وثيقة المواد والتصنيف
- 66 fed std single material response inner member
- وثيقة المواد والتصنيف
- 66 fed std single material response internal rod end body
- مادة
- copper alloy race insert
- مادة
- steel comp 4130 internal rod end body
- مادة
- steel comp e52100 inner member
- القطر الخارجي للعضو الخارجي
- 0.5620 inches maximum
- عرض العضو الخارجي
- 0.1870 inches nominal
- عرض الساق عبر مسطحات المفتاح
- 0.2810 inches nominal
- نمط الساق
- internally threaded w/bead and wrench flats and inspection hole
- طول خيط الساق
- 0.5000 inches nominal
- الميزات الخاصة
- dry film lubrication on i. d. of race, bore of ball, and spherical surface
- تصنيف الحمل الشعاعي الثابت
- 1430 pounds
- مُحدد الأسلوب
- ball type
- فئة الخيط
- 3b
- قطر الخيط
- 0.190 inches nominal
- اتجاه الخيط
- right-hand
- كمية الخيوط لكل بوصة
- 32
- مُعَيِّن سلسلة الخيوط
- unf
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-00-003-6724. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-00-003-6724?
- The FSCG of the NSN 3120-00-003-6724 is 3120
- Does the NSN 3120-00-003-6724 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-003-6724 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-003-6724 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-003-6724 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-003-6724 was assigned to the Federal Catalog?
- It was assigned منذ 54 سنة, on Fri, May 26, 1972