KJN07C009-241

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: KJN07C009-241 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: KJN07C009-241. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
KJN07C009-241
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-00-038-8959
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
11/10/1972

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square inside left corner corner shape, 0.4380 inches minimum and 0.4390 inches maximum body inside diameter, 0.5633 inches minimum and 0.5638 inches maximum body outside diameter, square outside left corner corner shape, square left flange outside right corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-038-8959 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.4380 inches minimum and 0.4390 inches maximum
القطر الخارجي للجسم
0.5633 inches minimum and 0.5638 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
0.9170 inches minimum and 0.9370 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
تصنيف الصلابة
27.0 rockwell c minimum and 32.0 rockwell c maximum outer layer
الطول الإجمالي
0.3287 inches minimum and 0.3437 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std 1st material response or aisi 410 assn std 2nd material response or aisi 416 assn std 3rd material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 or steel comp 410 or steel comp 416 outer layer
الميزات الخاصة
plastic liner bonded to left end surface of body and flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: KJN07C009-241. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-00-038-8959?
The FSCG of the NSN 3120-00-038-8959 is 3120
Does the NSN 3120-00-038-8959 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-00-038-8959 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-00-038-8959 contain precious materials?
Precious metal content is unknown
Does NSN 3120-00-038-8959 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-00-038-8959 was assigned to the Federal Catalog?
It was assigned منذ 52 سنة, on Fri, Nov 10, 1972

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: KJN07C009-241

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

122-2255876 PIECE 60
3120-01-291-5164
Sleeve Bushing
122-2255885 PC 146
3120-01-292-3356
Sleeve Bushing
122-2255891 PIECE 28
3120-01-293-6152
Sleeve Bearing
122-2255896 PIECE 26
3120-01-180-4632
Sleeve Bearing
122-2255896 PIECE 27
3120-01-180-4633
Sleeve Bearing
122-2255896 PIECE 28
3120-01-180-4634
Sleeve Bearing
122-2255896 PIECE 29
3120-01-180-4635
Sleeve Bearing
122-2255896 PIECE 30
3120-01-180-4636
Sleeve Bearing
122-2255896 PIECE 31
3120-01-178-9519
Sleeve Bearing
122-2260011 PIECE 11
3120-01-203-5183
Sleeve Bushing
122-2260011 PIECE 8
3120-01-386-0924
Linear-Rotary Motion Roller
122-2260207 PIECE 11
3120-01-203-5183
Sleeve Bushing
122-2260207 PIECE 8
3120-01-386-0924
Linear-Rotary Motion Roller
122-2268296
3120-01-493-4659
Sleeve Bearing
122-2268296 PART NO. 23
3120-01-493-4659
Sleeve Bearing