07-211-08-028

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 07-211-08-028 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 07-211-08-028. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
07-211-08-028
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-00-038-8971
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
11/10/1972

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square inside left corner corner shape, 0.5005 inches minimum and 0.5015 inches maximum body inside diameter, square left flange outside right corner corner shape, square outside left corner corner shape, 0.6260 inches minimum and 0.6265 inches maximum body outside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-038-8971 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.5005 inches minimum and 0.5015 inches maximum
القطر الخارجي للجسم
0.6260 inches minimum and 0.6265 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
0.9800 inches minimum and 1.0000 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
تصنيف الصلابة
27.0 rockwell c minimum and 32.0 rockwell c maximum outer layer
الطول الإجمالي
0.9225 inches minimum and 0.9375 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std 1st material response or aisi 410 assn std 2nd material response or aisi 416 assn std 3rd material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 or steel comp 410 or steel comp 416 outer layer
الميزات الخاصة
plastic liner bonded to left end surface of body and flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 07-211-08-028. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-00-038-8971?
The FSCG of the NSN 3120-00-038-8971 is 3120
Does the NSN 3120-00-038-8971 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-00-038-8971 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-00-038-8971 contain precious materials?
Precious metal content is unknown
Does NSN 3120-00-038-8971 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-00-038-8971 was assigned to the Federal Catalog?
It was assigned منذ 52 سنة, on Fri, Nov 10, 1972

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 07-211-08-028

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

NAS77A5-015
3120-01-202-2752
Sleeve Bushing
NAS77A5-015P
3120-01-204-4833
Sleeve Bushing
NAS77A5-016
3120-00-526-0257
Sleeve Bushing
NAS77A5-017P
3120-01-521-5163
Sleeve Bushing
NAS77A5-018
3120-01-380-2743
Sleeve Bushing
NAS77A5-019P
3120-00-221-1001
Sleeve Bushing
NAS77A5-020
3120-00-661-5437
Sleeve Bushing
NAS77A5-020N
3120-01-061-8081
Sleeve Bushing
NAS77A5-020P
3120-01-130-6602
Sleeve Bushing
NAS77A5-021
3120-01-334-9178
Sleeve Bushing
NAS77A5-023
3120-01-202-9444
Sleeve Bushing
NAS77A5-023P
3120-00-946-1211
Sleeve Bushing
NAS77A5-024
3120-01-558-7568
Sleeve Bushing
NAS77A5-025
3120-01-584-5850
Sleeve Bushing
NAS77A5-025N
3120-01-586-4140
Sleeve Bushing