3120-00-187-9041 Rod End Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-00-187-9041.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-00-187-9041. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-00-187-9041
- اسم العنصر الكود
- 13209
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 03/16/1973
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.
1.8650 inches minimum and 1.8950 inches maximum bore center to shank end distance, 45.0 rockwell c nominal inner member hardness rating, 38.0 rockwell c nominal rod end body hardness rating, 0.5880 inches minimum and 0.5930 inches maximum inner member width, 0.2495 inches minimum and 0.2500 inches maximum bore diameter
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-187-9041 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- قطر التجويف
- 0.2495 inches minimum and 0.2500 inches maximum
- المسافة من مركز التجويف إلى نهاية الساق
- 1.8650 inches minimum and 1.8950 inches maximum
- تصنيف الصلابة
- 38.0 rockwell c nominal rod end body
- تصنيف الصلابة
- 45.0 rockwell c nominal inner member
- عرض العضو الداخلي
- 0.5880 inches minimum and 0.5930 inches maximum
- الطول الإجمالي
- 2.2975 inches minimum and 2.3500 inches maximum
- مادة
- steel comp 440c or steel comp 440f inner member
- مادة
- steel corrosion resisting internal rod end body
- مادة
- steel corrosion resisting race insert
- القطر الخارجي للعضو الخارجي
- 0.8650 inches minimum and 0.9100 inches maximum
- عرض العضو الخارجي
- 0.3350 inches minimum and 0.3500 inches maximum
- نمط الساق
- externally threaded
- طول خيط الساق
- 1.2500 inches minimum and 1.3400 inches maximum
- تصنيف الحمل الشعاعي الثابت
- 5500 pounds
- الميزات الخاصة
- std nas keyway in shank,0.0005 in. min 0.0015 in. max diametral clearance
- مُحدد الأسلوب
- ball type
- معالجة السطح
- chromium inner member
- فئة الخيط
- 3a
- قطر الخيط
- 0.375 inches nominal
- اتجاه الخيط
- right-hand
- كمية الخيوط لكل بوصة
- 24
- مُعَيِّن سلسلة الخيوط
- unf
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-00-187-9041. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-00-187-9041?
- The FSCG of the NSN 3120-00-187-9041 is 3120
- Does the NSN 3120-00-187-9041 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-187-9041 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-187-9041 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-187-9041 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-187-9041 was assigned to the Federal Catalog?
- It was assigned منذ 53 سنة, on Fri, Mar 16, 1973