NAS72-4-005

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: NAS72-4-005 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: NAS72-4-005. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
NAS72-4-005
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-00-287-9786
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
01/01/1963

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.3170 inches minimum and 0.3220 inches maximum overall length, square all corners corner shape, 0.4345 inches minimum and 0.4355 inches maximum body outside diameter, 0.2495 inches minimum and 0.2518 inches maximum body inside diameter, mil-s-6758,sae 4130 mil spec 1st material response or mil-s-6050,comp 8630 mil spec 2nd material response overall material document and classification

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-287-9786 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.2495 inches minimum and 0.2518 inches maximum
القطر الخارجي للجسم
0.4345 inches minimum and 0.4355 inches maximum
شكل الزاوية
square all corners
الطول الإجمالي
0.3170 inches minimum and 0.3220 inches maximum
وثيقة المواد والتصنيف
mil-s-6758,sae 4130 mil spec 1st material response or mil-s-6050,comp 8630 mil spec 2nd material response overall
مادة
steel comp 4130 or steel comp 8630 overall
مُحدد الأسلوب
solid, plain, no outside flanges
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches left end surface of body
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
63.0 microinches outside diameter surface of body

يستبدل

The NSN 3120-00-287-9786 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-516-1863 No Name Available 01/01/1961

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: NAS72-4-005. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-00-287-9786?
The FSCG of the NSN 3120-00-287-9786 is 3120
Does the NSN 3120-00-287-9786 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-00-287-9786 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-00-287-9786 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-00-287-9786 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-00-287-9786 was assigned to the Federal Catalog?
It was assigned منذ 62 سنة, on Tue, Jan 1, 1963

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: NAS72-4-005

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

186329PC232
3110-00-159-9283
Annular Ball Bearing
18633
3120-01-316-7594
Sleeve Bearing
186334
3110-00-156-5451
Annular Ball Bearing
1863370 PIECE 24
3120-01-211-5091
Sleeve Bushing
1863383 PIECE 16
3120-01-221-4127
Sleeve Bushing
186338PC28
3120-00-339-2531
Sleeve Bushing
1863405 PIECE 34
3120-01-209-5455
Sleeve Bushing
186341PC232
3110-00-159-9283
Annular Ball Bearing
186350PC3
3120-00-386-3210
Sleeve Bearing
186353PC3
3120-00-386-3210
Sleeve Bearing
186363-5
3110-00-156-4148
Annular Ball Bearing
186376R91
3110-00-155-6756
Annular Ball Bearing
186384
3120-00-540-9343
Sleeve Bushing
186386PC616
3120-00-339-2531
Sleeve Bushing
1863K21P001
3120-01-069-3464
Sleeve Bushing