FBJW24TF-12A008

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: FBJW24TF-12A008 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: FBJW24TF-12A008. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
FBJW24TF-12A008
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-00-553-2434
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
10/30/1974

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square outside left corner corner shape, square left flange outside right corner corner shape, square inside left corner corner shape, 0.9388 inches minimum and 0.9398 inches maximum body outside diameter, 0.7505 inches minimum and 0.7515 inches maximum body inside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-553-2434 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.7505 inches minimum and 0.7515 inches maximum
القطر الخارجي للجسم
0.9388 inches minimum and 0.9398 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.4800 inches minimum and 1.5000 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.2975 inches minimum and 0.3125 inches maximum
وثيقة المواد والتصنيف
qq-a-200/3,t8511 fed spec single material response or qq-a-225/6,t851 fed spec single material response outer layer
مادة
aluminum alloy 2024 outer layer
مادة
plastic polytetrafluoroethylene inner layer
الميزات الخاصة
plastic,polytetrafluoroethylene liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end
وثيقة معالجة السطح والتصنيف
mil-a-8625,type 1 or 2 mil spec single treatment response or mil-c-5541 mil spec single treatment response overall
معالجة السطح
anodize or chromate outer layer

يستبدل

The NSN 3120-00-553-2434 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-508-3240 No Name Available 12/01/1979

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: FBJW24TF-12A008. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-00-553-2434?
The FSCG of the NSN 3120-00-553-2434 is 3120
Does the NSN 3120-00-553-2434 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-00-553-2434 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-00-553-2434 contain precious materials?
Precious metal content is unknown
Does NSN 3120-00-553-2434 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-00-553-2434 was assigned to the Federal Catalog?
It was assigned منذ 50 سنة, on Wed, Oct 30, 1974

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: FBJW24TF-12A008

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

174855
3120-00-980-8437
Sleeve Bearing
174860
3110-01-541-4792
Needle Bearing Cam Follower
174862
3110-01-541-5322
Bearing Ball
174874
3110-00-100-3614
Tapered Roller Cone and Rollers
174876
3120-01-213-0855
Rod End Plain Bearing
17488
3110-00-195-1053
Thrust Ball Bearing
174883-1
3110-01-443-7012
Duplex Ball Bearing
17489
3110-00-227-4252
Tapered Roller Bearing Cup
174897
3110-00-100-0515
Tapered Roller Bearing Cup
17489P11
3120-00-073-4308
Self-Aligning Plain Bearing
1748P
3110-00-100-0575
Tapered Roller Bearing Cup
17490 PIECE 104
3110-00-100-3159
Tapered Roller Cone and Rollers
17490 PIECE 20
3120-01-184-6017
Sleeve Bushing
17490 PIECE 38
3120-01-226-9587
Thrust Washer Bearing
17490 PIECE 39
3120-01-226-9588
Thrust Washer Bearing