3120-00-588-6229 Rod End Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-00-588-6229.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-00-588-6229. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-00-588-6229
- اسم العنصر الكود
- 13209
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 12/28/1974
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.
mil-g-23827 mil spec single material response lubrication material document and classification, 1.5470 inches minimum and 1.5770 inches maximum bore center to shank end distance, 0.3700 inches minimum and 0.3750 inches maximum inner member width, 1.9170 inches minimum and 1.9570 inches maximum overall length, 0.2495 inches minimum and 0.2525 inches maximum bore diameter
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-588-6229 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- قطر التجويف
- 0.2495 inches minimum and 0.2525 inches maximum
- المسافة من مركز التجويف إلى نهاية الساق
- 1.5470 inches minimum and 1.5770 inches maximum
- عرض العضو الداخلي
- 0.3700 inches minimum and 0.3750 inches maximum
- الطول الإجمالي
- 1.9170 inches minimum and 1.9570 inches maximum
- وثيقة المواد والتصنيف
- mil-g-23827 mil spec single material response lubrication
- مادة
- grease lubrication
- مادة
- steel corrosion resisting race insert
- مادة
- steel inner member
- مادة
- steel rod end body
- القطر الخارجي للعضو الخارجي
- 0.7400 inches minimum and 0.7600 inches maximum
- عرض العضو الخارجي
- 0.2760 inches minimum and 0.2860 inches maximum
- نمط الساق
- externally threaded
- طول خيط الساق
- 0.9690 inches minimum and 1.0620 inches maximum
- مُحدد الأسلوب
- ball type
- معالجة السطح
- cadmium rod end body
- معالجة السطح
- chromium inner member
- فئة الخيط
- 2a
- قطر الخيط
- 0.250 inches nominal
- اتجاه الخيط
- right-hand
- كمية الخيوط لكل بوصة
- 28
- مُعَيِّن سلسلة الخيوط
- unf
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-00-588-6229. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-00-588-6229?
- The FSCG of the NSN 3120-00-588-6229 is 3120
- Does the NSN 3120-00-588-6229 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-588-6229 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-588-6229 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-588-6229 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-588-6229 was assigned to the Federal Catalog?
- It was assigned منذ 51 سنة, on Sat, Dec 28, 1974