3120-00-661-7600 Rod End Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-00-661-7600.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-00-661-7600. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-00-661-7600
- اسم العنصر الكود
- 13209
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 01/01/1963
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.
0.5890 inches minimum and 0.5990 inches maximum inspection hole center to end distance, 0.6200 inches minimum and 0.6250 inches maximum inner member width, 2.1250 inches minimum and 2.1350 inches maximum bore center to shank end distance, flush lubrication fitting features provided, 0.4995 inches minimum and 0.5015 inches maximum bore diameter
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-661-7600 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- قطر التجويف
- 0.4995 inches minimum and 0.5015 inches maximum
- المسافة من مركز التجويف إلى نهاية الساق
- 2.1250 inches minimum and 2.1350 inches maximum
- الميزات المقدمة
- flush lubrication fitting
- عرض العضو الداخلي
- 0.6200 inches minimum and 0.6250 inches maximum
- المسافة من مركز فتحة التفتيش إلى النهاية
- 0.5890 inches minimum and 0.5990 inches maximum
- ميزة التزييت
- groove internal surfaces
- الطول الإجمالي
- 2.7710 inches minimum and 2.7910 inches maximum
- مادة
- copper alloy race insert
- مادة
- steel outer race member
- مادة
- steel comp e52100 inner member
- القطر الخارجي للعضو الخارجي
- 1.3020 inches minimum and 1.3220 inches maximum
- عرض العضو الخارجي
- 0.4950 inches minimum and 0.5050 inches maximum
- طول الساق من نهاية الساق إلى الكتف
- 1.1558 inches minimum and 1.2495 inches maximum
- عرض الساق عبر مسطحات المفتاح
- 0.8650 inches minimum and 0.8850 inches maximum
- نمط الساق
- internally threaded w/hexagon end and inspection hole
- طول خيط الساق
- 1.1558 inches minimum and 1.2495 inches maximum
- مُحدد الأسلوب
- ball type extended one side
- معالجة السطح
- cadmium overall
- فئة الخيط
- 3b
- قطر الخيط
- 0.500 inches nominal
- اتجاه الخيط
- left-hand
- كمية الخيوط لكل بوصة
- 20
- مُعَيِّن سلسلة الخيوط
- unf
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-00-661-7600. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-00-661-7600?
- The FSCG of the NSN 3120-00-661-7600 is 3120
- Does the NSN 3120-00-661-7600 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-661-7600 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-661-7600 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-00-661-7600 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-661-7600 was assigned to the Federal Catalog?
- It was assigned منذ 63 سنة, on Tue, Jan 1, 1963