K9757513P8

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: K9757513P8 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: K9757513P8. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
K9757513P8
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-00-661-7687
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
01/01/1963

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.7500 inches minimum and 0.7510 inches maximum body inside diameter, 0.8760 inches minimum and 0.8770 inches maximum body outside diameter, square left flange outside right corner corner shape, square outside left corner corner shape, square left flange body corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-661-7687 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.7500 inches minimum and 0.7510 inches maximum
القطر الخارجي للجسم
0.8760 inches minimum and 0.8770 inches maximum
شكل الزاوية
square left flange body corner
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
الانحراف عن الوثيقة المذكورة
body od modified,body id modified,o/a lg,flange od,and flange width modified
القطر الخارجي للشفة
0.9975 inches minimum and 1.0025 inches maximum
عرض الشفة
0.0600 inches minimum and 0.0650 inches maximum
الطول الإجمالي
0.4950 inches minimum and 0.5050 inches maximum
وثيقة المواد والتصنيف
mil-b-5687,ty 1,comp b mil spec single material response overall
مادة
copper alloy overall
مادة
oil lubricating lubrication
بيانات المواصفات/المعايير غير النهائية
1 type and b composition
مُحدد الأسلوب
solid, external flange one end

يستبدل

The NSN 3120-00-661-7687 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-294-0990 No Name Available 08/25/1971
3120-00-489-4025 No Name Available 01/01/1963
3120-00-954-6828 No Name Available 08/25/1971

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: K9757513P8. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-00-661-7687?
The FSCG of the NSN 3120-00-661-7687 is 3120
Does the NSN 3120-00-661-7687 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-00-661-7687 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-00-661-7687 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-00-661-7687 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-00-661-7687 was assigned to the Federal Catalog?
It was assigned منذ 62 سنة, on Tue, Jan 1, 1963

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: K9757513P8

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

422.1410.0000
3110-01-326-4359
Tapered Roller Bearing
422-1500
3110-00-227-3237
Needle Roller Bearing
422-1516
3110-01-144-9165
Needle Roller Bearing
422.1650.000
3110-01-386-2534
Tapered Roller Bearing
422.1650.0000
3110-01-386-2534
Tapered Roller Bearing
422-1833
3130-01-691-5445
Bearing Unit Housing
422-205
3110-00-108-9200
Annular Ball Bearing
422-25-017-0002
3120-01-334-9981
Sleeve Bushing
422-2826
3110-00-554-5389
Annular Ball Bearing
422-29-017-0005
3110-01-416-3112
Annular Ball Bearing
422-414
3110-00-100-3905
Tapered Roller Bearing
422-6487
3110-01-692-9360
Outer Bearing Ring
422-SA-123
3120-00-305-9038
Sleeve Bearing
422017
3110-00-840-7915
Self-Aligning Roller Bearing
42206
3110-00-144-8499
Annular Ball Bearing