- نوع وكمية مضاد الدوران/التزييت
- 2 hole
- القطر الداخلي للجسم
- 2.0020 inches minimum and 2.0030 inches maximum
- القطر الخارجي للجسم
- 2.4700 inches minimum and 2.5300 inches maximum
- شكل الزاوية
- chamfered inside left corner
- شكل الزاوية
- chamfered inside right corner
- شكل الزاوية
- square left flange body corner
- شكل الزاوية
- square left flange outside right corner
- شكل الزاوية
- square outside left corner
- شكل الزاوية
- square outside right corner
- القطر الخارجي للشفة
- 3.0900 inches minimum and 3.1500 inches maximum
- عرض الشفة
- 0.1150 inches minimum and 0.1350 inches maximum
- قطر الحفرة
- 0.2000 inches nominal first
- نمط الإقامة في مواد التشحيم
- grooved circular
- الطول الإجمالي
- 4.3650 inches minimum and 4.3850 inches maximum
- وثيقة المواد والتصنيف
- qq-s-763 fed spec 1st material response or 17-4ph,fscm 03876 mfr ref 1st material response or 66 fed std 2nd material response inner layer
- وثيقة المواد والتصنيف
- type 4b2,fscm 99384 mfr ref single material response outer layer
- مادة
- glass fiber outer layer
- مادة
- steel or steel comp 4340 inner layer
- الميزات الخاصة
- thd 2-1/8-16 un 3b opposite end of flange 0.6250 in.lg,2 holes equallyspaced 0.2000 in. w,0.3200 in. lg located 0.1550 in. from right end surface
- مُحدد الأسلوب
- solid, external flange one end
- تشطيب السطح
- 125.0 microinches outside diameter surface of flange
- تشطيب السطح
- 125.0 microinches left end surface of body and flange
- تشطيب السطح
- 125.0 microinches right end surface of body
- تشطيب السطح
- 125.0 microinches right end surface of left flange
- تشطيب السطح
- 63.0 microinches inside diameter surface of body
- موقع الأخدود السطحي والكمية
- 5 internal
- وثيقة معالجة السطح والتصنيف
- mil-s-5002 mil spec 1st treatment response or qq-p-416,cl 2 fed spec 2nd treatment response inner layer
- معالجة السطح
- passivate or cadmium inner layer
- وثيقة بيانات الاختبار
- "81349-mil-i-6866 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.). and 81349-mil-i-6868 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
