3120-00-841-1141 Rod End Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-00-841-1141.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-00-841-1141. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-00-841-1141
- اسم العنصر الكود
- 13209
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 12/21/1966
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.
0.3070 inches minimum and 0.3120 inches maximum inner member width, groove external outer member lubrication feature, 0.1895 inches minimum and 0.1915 inches maximum bore diameter, 1.2400 inches minimum and 1.2600 inches maximum bore center to shank end distance, 60.0 rockwell c minimum inner member hardness rating
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-841-1141 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- قطر التجويف
- 0.1895 inches minimum and 0.1915 inches maximum
- المسافة من مركز التجويف إلى نهاية الساق
- 1.2400 inches minimum and 1.2600 inches maximum
- تصنيف الصلابة
- 60.0 rockwell c minimum inner member
- عرض العضو الداخلي
- 0.3070 inches minimum and 0.3120 inches maximum
- ميزة التزييت
- groove external outer member
- ميزة التزييت
- groove internal outer member
- الطول الإجمالي
- 1.5475 inches minimum and 1.5775 inches maximum
- وثيقة المواد والتصنيف
- fed-std-66 fed std single material response inner member
- وثيقة المواد والتصنيف
- qq-n-35 fed spec single material response race insert
- وثيقة المواد والتصنيف
- qq-s-633 fed spec single material response rod end body
- مادة
- copper alloy race insert
- مادة
- steel inner member
- مادة
- steel rod end body
- القطر الخارجي للعضو الخارجي
- 0.6150 inches minimum and 0.6350 inches maximum
- عرض العضو الخارجي
- 0.2450 inches minimum and 0.2550 inches maximum
- نمط الساق
- externally threaded
- طول خيط الساق
- 0.7500 inches minimum
- الميزات الخاصة
- magnetic particle inspected,magnafluxed,rod end stamped w/letter m
- تصنيف الحمل الشعاعي الثابت
- 910 pounds
- مُحدد الأسلوب
- ball type
- وثيقة معالجة السطح والتصنيف
- qq-p-416 fed spec single treatment response rod end body
- معالجة السطح
- cadmium rod end body
- فئة الخيط
- 3a
- قطر الخيط
- 0.190 inches nominal
- اتجاه الخيط
- right-hand
- كمية الخيوط لكل بوصة
- 32
- مُعَيِّن سلسلة الخيوط
- unf
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-00-841-1141. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-00-841-1141?
- The FSCG of the NSN 3120-00-841-1141 is 3120
- Does the NSN 3120-00-841-1141 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-00-841-1141 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-00-841-1141 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-841-1141 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-841-1141 was assigned to the Federal Catalog?
- It was assigned منذ 59 سنة, on Wed, Dec 21, 1966