3120-00-975-4984 Self-Aligning Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-00-975-4984.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-00-975-4984. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-00-975-4984
- اسم العنصر الكود
- 13208
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 01/01/1962
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. تتكون من كرة أرضية دقيقة مثقوبة (أو محمل كروي عادي) تُركّب حولها حلقة خارجية. قد تكون المجموعة قابلة للفصل أو غير قابلة للفصل. لا يشمل ذلك: المحمل العادي، وطرف القضيب، والمحمل العادي، والكروي.
0.2495 inches minimum and 0.2500 inches maximum bore diameter, 30.0 rockwell c minimum and 42.0 rockwell c maximum outer race member hardness rating, 0.3380 inches minimum and 0.3430 inches maximum inner member width, 56.0 rockwell c nominal inner member hardness rating, groove internal inner member lubrication feature
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-00-975-4984 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- قطر التجويف
- 0.2495 inches minimum and 0.2500 inches maximum
- تصنيف الصلابة
- 56.0 rockwell c nominal inner member
- تصنيف الصلابة
- 30.0 rockwell c minimum and 42.0 rockwell c maximum outer race member
- عرض العضو الداخلي
- 0.3380 inches minimum and 0.3430 inches maximum
- ميزة التزييت
- groove internal inner member
- ميزة التزييت
- groove internal outer member
- ميزة التزييت
- perforation outer race member
- ميزة التزييت
- perforation inner member
- وثيقة المواد والتصنيف
- mil-g-23827 mil spec single material response lubrication
- مادة
- grease and lubricant dry film lubrication
- مادة
- steel outer race member
- مادة
- steel comp e52100 inner member
- القطر الخارجي للعضو الخارجي
- 0.6557 inches minimum and 0.6562 inches maximum
- عرض العضو الخارجي
- 0.2450 inches minimum and 0.2550 inches maximum
- تصنيف الحمل الشعاعي الثابت
- 7300 pounds
- مُحدد الأسلوب
- without insert or liner
- معالجة السطح
- cadmium outer race member
- معالجة السطح
- chromium inner member
- وثيقة بيانات الاختبار
- "81349-mil-b-5628 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-00-975-4984. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-00-975-4984?
- The FSCG of the NSN 3120-00-975-4984 is 3120
- Does the NSN 3120-00-975-4984 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482300040
- Does NSN 3120-00-975-4984 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-00-975-4984 contain precious materials?
- Precious metal content is unknown
- Does NSN 3120-00-975-4984 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-00-975-4984 was assigned to the Federal Catalog?
- It was assigned منذ 64 سنة, on Mon, Jan 1, 1962