3120-01-014-8990 Rod End Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-01-014-8990.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-01-014-8990. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-01-014-8990
- اسم العنصر الكود
- 13209
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 01/08/1976
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.
39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body hardness rating, 2.6150 inches minimum and 2.6350 inches maximum bore center to shank end distance, 0.6245 inches minimum and 0.6250 inches maximum bore diameter, 0.7480 inches minimum and 0.7500 inches maximum inner member width, 3.3725 inches minimum and 3.4025 inches maximum overall length
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-014-8990 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- قطر التجويف
- 0.6245 inches minimum and 0.6250 inches maximum
- المسافة من مركز التجويف إلى نهاية الساق
- 2.6150 inches minimum and 2.6350 inches maximum
- تصنيف الصلابة
- 39.0 rockwell c minimum and 42.0 rockwell c maximum rod end body
- عرض العضو الداخلي
- 0.7480 inches minimum and 0.7500 inches maximum
- الطول الإجمالي
- 3.3725 inches minimum and 3.4025 inches maximum
- وثيقة المواد والتصنيف
- ams 5643 assn std 1st material response or ams 5528 assn std 2nd material response or aisi 410 assn std 3rd material response race insert
- مادة
- plastic polytetrafluoroethylene race liner
- مادة
- steel comp 440c inner member
- مادة
- steel comp 630 or steel comp 631 or steel comp 410 race insert
- مادة
- steel comp e4340 rod end body
- القطر الخارجي للعضو الخارجي
- 1.5150 inches minimum and 1.5350 inches maximum
- عرض العضو الخارجي
- 0.5720 inches minimum and 0.5820 inches maximum
- طول خيط الساق
- 1.5310 inches minimum and 1.5930 inches maximum
- نمط الساق
- externally threaded
- الميزات الخاصة
- keyway in shank
- تصنيف الحمل الشعاعي الثابت
- 21900 pounds
- مُحدد الأسلوب
- ball type
- وثيقة معالجة السطح والتصنيف
- qq-p-35 fed spec single treatment response race insert
- وثيقة معالجة السطح والتصنيف
- qq-p-46 ty 1 cl 1 fed spec single treatment response rod end body
- معالجة السطح
- cadmium rod end body
- معالجة السطح
- passivate race insert
- فئة الخيط
- 3a
- قطر الخيط
- 0.625 inches nominal
- اتجاه الخيط
- right-hand
- كمية الخيوط لكل بوصة
- 18
- مُعَيِّن سلسلة الخيوط
- unf
يستبدل
The NSN 3120-01-014-8990 is used in place of the following discontinued or alternate items:
| NSN | اسم | تاريخ |
|---|---|---|
| 3120-01-136-5792 | No Name Available | 07/01/1997 |
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
| رقم القطعة | اسم |
|---|---|
| M81935/1-10K | Rod End Plain Bearing |
| MIL-B-81935 | Rod End Plain Bearing |
| MS21242S10K | Rod End Plain Bearing |
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-01-014-8990. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-01-014-8990?
- The FSCG of the NSN 3120-01-014-8990 is 3120
- Does the NSN 3120-01-014-8990 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-014-8990 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-01-014-8990 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-014-8990 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-014-8990 was assigned to the Federal Catalog?
- It was assigned منذ 50 سنة, on Thu, Jan 8, 1976
السعر والتوافر
قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 3120-01-014-8990
توفر المخزون
هذا المنتج متوفر بالكميات والشروط التالية:
| مادة جديدة | 107 |
| فائض جديد | 117 |
| المجموع | 224 |
تم تحديث توفر هذا العنصر آخر مرة في:
09/21/2025 04:09 PM EDT.
قد يكون التوفر قد تغير منذ ذلك الحين. اطلب عرض أسعار لمعرفة الأسعار والتوفر المحدث.