FBJW16TH-08C012

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: FBJW16TH-08C012 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: FBJW16TH-08C012. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
FBJW16TH-08C012
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-025-6485
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
08/07/1976

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.6260 inches minimum and 0.6265 inches maximum body outside diameter, square outside left corner corner shape, armored multi-purpose vehicle end item identification, 0.5005 inches minimum and 0.5015 inches maximum body inside diameter, square left flange outside right corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-025-6485 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

تحديد العنصر النهائي
armored multi-purpose vehicle
القطر الداخلي للجسم
0.5005 inches minimum and 0.5015 inches maximum
القطر الخارجي للجسم
0.6260 inches minimum and 0.6265 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
0.9800 inches minimum and 1.0000 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.4225 inches minimum and 0.4375 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
الميزات الخاصة
plastic,polytetrafluoroethylene liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body

يستبدل

The NSN 3120-01-025-6485 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-152-5627 No Name Available 11/01/1979
3120-00-263-9532 No Name Available 01/01/1989
3120-00-515-5305 No Name Available 01/01/1979
3120-01-172-5610 No Name Available 12/01/1996

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: FBJW16TH-08C012. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-025-6485?
The FSCG of the NSN 3120-01-025-6485 is 3120
Does the NSN 3120-01-025-6485 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-025-6485 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-025-6485 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-025-6485 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-025-6485 was assigned to the Federal Catalog?
It was assigned منذ 48 سنة, on Sat, Aug 7, 1976

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: FBJW16TH-08C012

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

105S
3110-00-554-5408
Annular Ball Bearing
105S100
3110-00-198-0364
Annular Ball Bearing
105S82
3110-00-775-0891
Annular Ball Bearing
105SH
3110-00-554-5406
Annular Ball Bearing
105SHQ5A7
3110-00-554-5406
Annular Ball Bearing
105SQ5
3110-00-554-5408
Annular Ball Bearing
105SQ5A7
3110-00-554-5408
Annular Ball Bearing
105T
3110-01-131-6833
Annular Ball Bearing
105T30-11
3110-01-131-6833
Annular Ball Bearing
105W
3110-00-155-6659
Annular Ball Bearing
105X5
3110-00-100-0670
Tapered Roller Cone and Rollers
105X6
3110-00-100-0283
Tapered Roller Cone and Rollers
105Z1025
3110-01-013-3921
Annular Ball Bearing
106
3110-00-554-5384
Annular Ball Bearing
106-0178
3120-01-520-6811
Sleeve Bearing