FBRR-10C018

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: FBRR-10C018 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: FBRR-10C018. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
FBRR-10C018
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-028-6629
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
10/08/1976

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square left flange outside right corner corner shape, 0.6255 inches minimum and 0.6265 inches maximum body inside diameter, square inside left corner corner shape, square outside left corner corner shape, 0.8137 inches minimum and 0.8142 inches maximum body outside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-028-6629 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.6255 inches minimum and 0.6265 inches maximum
القطر الخارجي للجسم
0.8137 inches minimum and 0.8142 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.2300 inches minimum and 1.2500 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.6100 inches minimum and 0.6250 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
الميزات الخاصة
plastic,polytetrafluoroethylene liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body

يستبدل

The NSN 3120-01-028-6629 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-263-9503 No Name Available 01/01/1988

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: FBRR-10C018. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-028-6629?
The FSCG of the NSN 3120-01-028-6629 is 3120
Does the NSN 3120-01-028-6629 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-028-6629 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-028-6629 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-028-6629 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-028-6629 was assigned to the Federal Catalog?
It was assigned منذ 48 سنة, on Fri, Oct 8, 1976

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: FBRR-10C018

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

NAS75-5-005
3120-00-814-8487
Sleeve Bushing
NAS75-5-006
3120-00-661-7383
Sleeve Bushing
NAS75-5-007
3120-00-661-7406
Sleeve Bushing
NAS75-5-008
3120-00-287-7933
Sleeve Bushing
NAS75-5-008-0.015
3120-01-723-6275
Sleeve Bushing
NAS75-5-009
3120-00-287-7934
Sleeve Bearing
NAS75-5-010
3120-00-585-4766
Sleeve Bushing
NAS75-5-011
3120-00-287-7935
Sleeve Bearing
NAS75-5-012
3120-00-287-7936
Sleeve Bushing
NAS75-5-013
3120-00-287-7939
Sleeve Bushing
NAS75-5-014
3120-00-661-6979
Sleeve Bushing
NAS75-5-015
3120-00-943-5507
Sleeve Bushing
NAS75-5-016
3120-00-516-1961
Sleeve Bushing
NAS75-5-017
3120-00-661-6978
Sleeve Bushing
NAS75-5-018
3120-00-516-1966
Sleeve Bushing