FBRR-06A008

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: FBRR-06A008 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: FBRR-06A008. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
FBRR-06A008
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-039-7607
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
04/25/1977

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.5007 inches minimum and 0.5017 inches maximum body outside diameter, 0.3755 inches minimum and 0.3765 inches maximum body inside diameter, square outside left corner corner shape, square inside left corner corner shape, square left flange outside right corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-039-7607 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.3755 inches minimum and 0.3765 inches maximum
القطر الخارجي للجسم
0.5007 inches minimum and 0.5017 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
0.8550 inches minimum and 0.8750 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.2975 inches minimum and 0.3125 inches maximum
مادة
aluminum alloy 2024 outer layer
مادة
plastic polytetrafluoroethylene inner layer
الميزات الخاصة
plastic liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
25.0 microinches left end surface of body and flange
تشطيب السطح
63.0 microinches outside diameter surface of body
معالجة السطح
anodize overall

يستبدل

The NSN 3120-01-039-7607 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-006-2338 No Name Available 04/01/1986
3120-01-311-6348 No Name Available 09/04/1991
3120-01-527-1386 No Name Available 06/01/2005

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: FBRR-06A008. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-039-7607?
The FSCG of the NSN 3120-01-039-7607 is 3120
Does the NSN 3120-01-039-7607 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-039-7607 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-039-7607 contain precious materials?
Precious metal content is unknown
Does NSN 3120-01-039-7607 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-039-7607 was assigned to the Federal Catalog?
It was assigned منذ 48 سنة, on Mon, Apr 25, 1977

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: FBRR-06A008

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

911639
3110-01-455-0286
Annular Ball Bearing
9116484
3110-01-227-0510
Annular Ball Bearing
9116493
3110-01-329-6871
Annular Ball Bearing
9116495
3110-00-100-3095
Tapered Roller Cone and Rollers
911650-1
3110-00-144-8519
Annular Ball Bearing
9116506
3110-01-334-4387
Annular Ball Bearing
911677-001
3120-01-354-5712
Sleeve Bearing
91169
3120-00-591-8670
Sleeve Bearing
911692-00
3110-00-446-1726
Annular Ball Bearing
9116983
3120-00-941-2394
Sleeve Bearing
9116K
3110-01-644-1841
Annular Ball Bearing
9116KDDG
3110-00-271-0258
Annular Ball Bearing
9116KFS216
3110-00-554-3911
Annular Ball Bearing
9116M37P01
3120-00-627-3181
Sleeve Bushing
9116M61P10
3120-01-218-1288
Sleeve Bushing