53G970715-23

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 53G970715-23 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 53G970715-23. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
53G970715-23
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-040-2128
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
05/04/1977

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square outside left corner corner shape, square inside left corner corner shape, 0.6260 inches minimum and 0.6265 inches maximum body outside diameter, 0.5005 inches minimum and 0.5015 inches maximum body inside diameter, square left flange outside right corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-040-2128 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.5005 inches minimum and 0.5015 inches maximum
القطر الخارجي للجسم
0.6260 inches minimum and 0.6265 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
0.9800 inches minimum and 1.0000 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.3287 inches minimum and 0.3437 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
الميزات الخاصة
plastic liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end

يستبدل

The NSN 3120-01-040-2128 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-514-8670 No Name Available 03/01/1978
3120-00-515-5303 No Name Available 03/01/1979

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 53G970715-23. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-040-2128?
The FSCG of the NSN 3120-01-040-2128 is 3120
Does the NSN 3120-01-040-2128 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-040-2128 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-040-2128 contain precious materials?
Precious metal content is unknown
Does NSN 3120-01-040-2128 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-040-2128 was assigned to the Federal Catalog?
It was assigned منذ 48 سنة, on Wed, May 4, 1977

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 53G970715-23

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

1155402
3110-01-274-1124
Bearing Retaining Plate
115541-1
3120-00-018-1329
Drive Assem Bearing
1155474
3110-00-019-8615
Annular Ball Bearing
11554L
3110-01-534-2260
Annular Ball Bearing
1155520
3120-01-296-0389
Sleeve Bearing
1155521
3120-01-295-5246
Sleeve Bearing
115553
3110-01-304-7722
Bearing Roller Retainer
115558-002
3110-00-725-4099
Annular Ball Bearing
115558-006
3110-00-141-9559
Annular Ball Bearing
115559-008
3110-00-691-0361
Annular Ball Bearing
115561
3120-01-238-4662
Sleeve Bearing
115564AS020
3120-00-226-6042
Sleeve Bearing
115565
3120-00-866-9326
Sleeve Bearing
115565-020
3120-00-662-8896
Sleeve Bearing
115565ASSTD
3120-00-866-9326
Sleeve Bearing