53G970715-19

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 53G970715-19 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 53G970715-19. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
53G970715-19
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-043-1469
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
06/19/1977

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square outside left corner corner shape, square inside left corner corner shape, square left flange outside right corner corner shape, 0.5633 inches minimum and 0.5638 inches maximum body outside diameter, 0.4380 inches minimum and 0.4390 inches maximum body inside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-043-1469 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.4380 inches minimum and 0.4390 inches maximum
القطر الخارجي للجسم
0.5633 inches minimum and 0.5638 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
0.9170 inches minimum and 0.9370 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.3287 inches minimum and 0.3437 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
الميزات الخاصة
plastic,polytetrafluoroethylene liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end

يستبدل

The NSN 3120-01-043-1469 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-006-8186 No Name Available 11/01/1980
3120-00-515-5300 No Name Available 04/01/1979

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 53G970715-19. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-043-1469?
The FSCG of the NSN 3120-01-043-1469 is 3120
Does the NSN 3120-01-043-1469 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-043-1469 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-043-1469 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-043-1469 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-043-1469 was assigned to the Federal Catalog?
It was assigned منذ 48 سنة, on Sun, Jun 19, 1977

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 53G970715-19

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

51422A01
3110-01-464-1815
Annular Ball Bearing
514238-4
3110-00-278-6967
Bearing Retainer and Rollers
514238-5
3110-00-278-6952
Inner Bearing Ring
514238-7
3110-00-278-6968
Bearing Retainer and Rollers
514238-8
3110-00-278-6951
Inner Bearing Ring
51423S50001-84338PC27
3120-00-343-2166
Sleeve Bearing
514250
3120-00-988-4564
Sleeve Bushing
51426
3120-00-947-6796
Rod End Plain Bearing
51429
3110-01-217-9245
Bearing Retaining Plate
5142T60P01
3130-01-711-1176
Plain Bearing Unit
5143-23
3120-00-661-7724
Sleeve Bushing
5143010117
3130-01-161-0094
Bearing Unit Housing
514301013904
3120-00-961-6216
Sleeve Bearing Half
514301013906
3120-00-661-4743
Thrust Washer Bearing
514301013918
3120-00-661-8669
Sleeve Bearing