3120-01-047-0497

المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-01-047-0497.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 3120-01-047-0497. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-047-0497
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
08/28/1977

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

1.2500 inches minimum and 1.2520 inches maximum body inside diameter, round inside left corner corner shape, square left flange outside right corner corner shape, 1.4010 inches minimum and 1.4050 inches maximum body outside diameter, square outside left corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-047-0497 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
1.2500 inches minimum and 1.2520 inches maximum
القطر الخارجي للجسم
1.4010 inches minimum and 1.4050 inches maximum
شكل الزاوية
round inside left corner
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.5000 inches minimum and 1.5300 inches maximum
عرض الشفة
0.0500 inches minimum and 0.0600 inches maximum
نمط الإقامة في مواد التشحيم
grooved circular
الطول الإجمالي
0.9600 inches minimum and 0.9800 inches maximum
مادة
copper alloy 544 overall
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
معالجة السطح
oxide overall

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-01-047-0497. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-047-0497?
The FSCG of the NSN 3120-01-047-0497 is 3120
Does the NSN 3120-01-047-0497 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-047-0497 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-047-0497 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-047-0497 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-047-0497 was assigned to the Federal Catalog?
It was assigned منذ 47 سنة, on Sun, Aug 28, 1977

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 3120-01-047-0497

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

3012DTL7077NT
3110-00-992-1013
Duplex Ball Bearing
3012L6
3110-00-100-3670
Tapered Roller Cone and Rollers
3012L8
3110-00-100-5527
Tapered Roller Bearing
3012NU307
3110-00-155-6511
Cylindrical Roller Bearing
3012T33P01
3120-00-038-5444
Sleeve Bushing
3012T62P01
3120-00-928-6830
Sleeve Bushing
3012Z6
3110-00-156-1462
Self-Aligning Roller Bearing
30130
3110-00-100-0624
Tapered Roller Bearing Cup
301313
3110-00-188-2769
Bearing Ball
301316
3120-01-615-9300
Sleeve Bearing
301324-94-95
3120-00-339-4363
Sleeve Bearing
301324-94X95
3120-00-339-4363
Sleeve Bearing
301327
3120-01-292-3200
Sleeve Bearing
301347
3120-01-396-8434
Sleeve Bushing
30135
3110-00-100-0344
Tapered Roller Bearing Cup