M81934/2-09A018

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: M81934/2-09A018 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: M81934/2-09A018. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
M81934/2-09A018
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-099-2630
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
08/15/1980

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.5630 inches minimum and 0.5640 inches maximum body inside diameter, square left flange outside right corner corner shape, 0.6887 inches minimum and 0.6897 inches maximum body outside diameter, square inside left corner corner shape, square outside left corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-099-2630 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.5630 inches minimum and 0.5640 inches maximum
القطر الخارجي للجسم
0.6887 inches minimum and 0.6897 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.1050 inches minimum and 1.1250 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.6095 inches minimum and 0.6245 inches maximum
وثيقة المواد والتصنيف
qq-a-200/3 fed spec 1st material response or qq-a-225/6 fed spec 2nd material response outer layer
مادة
aluminum alloy 2024 outer layer
مادة
plastic polytetrafluoroethylene inner layer
الميزات الخاصة
plastic,polytetrafluoroethylene liner bonded to left surface of flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body
وثيقة معالجة السطح والتصنيف
mil-c-5541 mil spec single treatment response outer layer
معالجة السطح
chromate outer layer

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: M81934/2-09A018. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-099-2630?
The FSCG of the NSN 3120-01-099-2630 is 3120
Does the NSN 3120-01-099-2630 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-099-2630 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-099-2630 contain precious materials?
Precious metal content is unknown
Does NSN 3120-01-099-2630 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-099-2630 was assigned to the Federal Catalog?
It was assigned منذ 44 سنة, on Fri, Aug 15, 1980

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: M81934/2-09A018

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

2579078
3120-00-006-2167
Sleeve Bushing
2579082
3120-00-006-2168
Sleeve Bushing
2579089
3120-00-006-2169
Sleeve Bushing
2579096
3120-00-006-2170
Sleeve Bushing
2579235-001A
3120-00-234-8872
Thrust Washer Bearing
2579243-001A
3120-00-413-4045
Sleeve Bearing
2579244-001A
3120-00-395-2197
Sleeve Bearing
2579245-001A
3120-00-234-8844
Thrust Washer Bearing
2579258-001A
3110-00-503-5284
Inner Bearing Ring
2579307-1
3110-01-131-1712
Annular Ball Bearing
2579307-2
3110-01-131-1713
Annular Ball Bearing
2579307-3
3110-01-131-1714
Annular Ball Bearing
2579307-4
3110-01-131-1715
Annular Ball Bearing
2579316
3110-01-131-1716
Annular Ball Bearing
2579707
3120-00-230-3383
Linear-Rotary Motion Roller