STF1004 Sleeve Bearing
المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: STF1004 Sleeve Bearing.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: STF1004. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- رقم القطعة
- STF1004
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-01-116-1239
- اسم العنصر الكود
- 13205
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 07/21/1981
قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.
2.7540 inches minimum and 2.7560 inches maximum body inside diameter, 2.5150 inches nominal right internal flange hole diameter, 2 slot antirotation/lubrication type and quantity, 2.9570 inches minimum and 2.9580 inches maximum body outside diameter, 8.0200 inches nominal overall length
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-116-1239 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- نوع وكمية مضاد الدوران/التزييت
- 2 slot
- القطر الداخلي للجسم
- 2.7540 inches minimum and 2.7560 inches maximum
- القطر الخارجي للجسم
- 2.9570 inches minimum and 2.9580 inches maximum
- الطول الإجمالي
- 8.0200 inches nominal
- قطر فتحة الشفة الداخلية اليمنى
- 2.5150 inches nominal
- عرض الشفة الداخلية اليمنى
- 0.4950 inches minimum and 0.5050 inches maximum
- عرض الفتحة
- 1.3750 inches nominal first
- طول الفتحة
- 0.7100 inches nominal first
- الميزات الخاصة
- two tabs on od surface of body,180 deg apart
- مُحدد الأسلوب
- solid, plain, no outside flanges, internal flange one end
- تشطيب السطح
- 125.0 microinches overall
- وثيقة بيانات الاختبار
- "76301-ps21202 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: STF1004. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-01-116-1239?
- The FSCG of the NSN 3120-01-116-1239 is 3120
- Does the NSN 3120-01-116-1239 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-01-116-1239 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-116-1239 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-116-1239 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-116-1239 was assigned to the Federal Catalog?
- It was assigned منذ 45 سنة, on Tue, Jul 21, 1981