M81934/2-07A020

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: M81934/2-07A020 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: M81934/2-07A020. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
M81934/2-07A020
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-132-1128
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
05/22/1982

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square all corners corner shape, 0.5633 inches minimum and 0.5643 inches maximum body outside diameter, 0.4380 inches minimum and 0.4390 inches maximum body inside diameter, 0.0575 inches minimum and 0.0625 inches maximum flange width, 0.9170 inches minimum and 0.9370 inches maximum flange outside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-132-1128 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.4380 inches minimum and 0.4390 inches maximum
القطر الخارجي للجسم
0.5633 inches minimum and 0.5643 inches maximum
شكل الزاوية
square all corners
القطر الخارجي للشفة
0.9170 inches minimum and 0.9370 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.6725 inches minimum and 0.6875 inches maximum
وثيقة المواد والتصنيف
qq-a-200/3 fed spec single material response or qq-a-225/6 fed spec single material response outer layer
مادة
aluminum alloy 2024 outer layer
مادة
plastic polytetrafluoroethylene inner layer
الميزات الخاصة
plastic liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end
معالجة السطح
chromate outer layer

يستبدل

The NSN 3120-01-132-1128 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-508-2614 No Name Available 02/01/1998

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: M81934/2-07A020. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-132-1128?
The FSCG of the NSN 3120-01-132-1128 is 3120
Does the NSN 3120-01-132-1128 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-132-1128 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-132-1128 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-132-1128 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-132-1128 was assigned to the Federal Catalog?
It was assigned منذ 43 سنة, on Sat, May 22, 1982

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: M81934/2-07A020

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

245837
3120-01-112-4432
Sleeve Bearing
24588
3110-00-107-6449
Annular Ball Bearing
24589
3110-00-100-3563
Tapered Roller Cone and Rollers
2458PC203
3120-00-288-6014
Sleeve Bearing
2459
3110-01-498-4777
Bearing Roller
24590
3110-00-198-1392
Inner Bearing Ring
24591
3110-00-100-0573
Tapered Roller Bearing Cup
2459192
3110-00-865-3862
Thrust Ball Bearing
2459193
3110-00-570-7274
Thrust Roller Bearing
2459196
3110-00-842-0843
Thrust Ball Bearing
24592
3110-00-100-3576
Tapered Roller Cone and Rollers
2459211
3120-00-438-6808
Sleeve Bushing
24595
3120-00-545-3708
Thrust Washer Bearing
24598
3120-00-779-0064
Thrust Washer Bearing
245AS727
3110-01-323-8091
Rod End Ball Bearing