3120-01-152-9916 Rod End Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-01-152-9916.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-01-152-9916. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-01-152-9916
- اسم العنصر الكود
- 13209
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 05/11/1983
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.
ams5630 assn std single material response internal rod end body material document and classification, 0.3070 inches minimum and 0.3120 inches maximum inner member width, 0.2495 inches minimum and 0.2500 inches maximum bore diameter, 1.2400 inches minimum and 1.2650 inches maximum bore center to shank end distance, ams5643 assn std single material response internal race insert material document and classification
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-152-9916 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- قطر التجويف
- 0.2495 inches minimum and 0.2500 inches maximum
- المسافة من مركز التجويف إلى نهاية الساق
- 1.2400 inches minimum and 1.2650 inches maximum
- عرض العضو الداخلي
- 0.3070 inches minimum and 0.3120 inches maximum
- وثيقة المواد والتصنيف
- ams5630 assn std single material response internal rod end body
- وثيقة المواد والتصنيف
- ams5643 assn std single material response internal race insert
- مادة
- steel comp 440c internal rod end body
- مادة
- steel comp 630 internal race insert
- القطر الخارجي للعضو الخارجي
- 0.6750 inches nominal
- عرض العضو الخارجي
- 0.2450 inches minimum and 0.2550 inches maximum
- نمط الساق
- externally threaded
- طول خيط الساق
- 0.7550 inches minimum and 0.7750 inches maximum
- مُحدد الأسلوب
- ball type
- فئة الخيط
- 3a
- قطر الخيط
- 0.250 inches nominal
- اتجاه الخيط
- right-hand
- كمية الخيوط لكل بوصة
- 28
- مُعَيِّن سلسلة الخيوط
- unjf
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
| رقم القطعة | اسم |
|---|---|
| 10159520 | Rod End Plain Bearing |
| 4061T89 | Rod End Plain Bearing |
| 4061T89P01 | Rod End Plain Bearing |
| 4061T89P01 99207 | Rod End Plain Bearing |
| ADNE4-305 | Rod End Plain Bearing |
| P35830 | Rod End Plain Bearing |
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-01-152-9916. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-01-152-9916?
- The FSCG of the NSN 3120-01-152-9916 is 3120
- Does the NSN 3120-01-152-9916 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-152-9916 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-01-152-9916 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-152-9916 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-152-9916 was assigned to the Federal Catalog?
- It was assigned منذ 43 سنة, on Wed, May 11, 1983