MS21241-07C013

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: MS21241-07C013 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: MS21241-07C013. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
MS21241-07C013
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-166-4429
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
11/11/1983

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square inside left corner corner shape, square outside left corner corner shape, 0.4380 inches minimum and 0.4390 inches maximum body inside diameter, 0.5633 inches minimum and 0.5638 inches maximum body outside diameter, square left flange outside right corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-166-4429 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.4380 inches minimum and 0.4390 inches maximum
القطر الخارجي للجسم
0.5633 inches minimum and 0.5638 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
0.9170 inches minimum and 0.9370 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.4672 inches minimum and 0.4687 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
plastic polytetrafluoroethylene left end surface of flange
مادة
steel comp 630 outer layer
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: MS21241-07C013. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-166-4429?
The FSCG of the NSN 3120-01-166-4429 is 3120
Does the NSN 3120-01-166-4429 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-166-4429 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-166-4429 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-166-4429 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-166-4429 was assigned to the Federal Catalog?
It was assigned منذ 41 سنة, on Fri, Nov 11, 1983

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: MS21241-07C013

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

674052-0006
3120-00-326-8170
Sleeve Bushing
674052-6
3120-00-326-8170
Sleeve Bushing
67406
3120-00-288-0957
Sleeve Bearing
67409-136-A
3110-01-526-9771
Bearing Retaining Plate
67409-142-A
3130-01-183-5780
Pillow Block Cap
67409-7-A
3130-01-254-5384
Bearing Unit Housing
67409-7-B
3130-01-254-5385
Bearing Unit Housing
67409-90-B
3110-01-526-9772
Bearing Retaining Plate
67410003
3110-01-652-5463
Thrust Ball Bearing
67410003-1
3110-01-652-5463
Thrust Ball Bearing
6741467
3120-00-516-1548
Sleeve Bushing
6742-04028L
3130-01-674-1667
Elastomeric Bearing
67425-67675
3110-01-129-9892
Tapered Roller Bearing
67425 AND 67675
3110-01-129-9892
Tapered Roller Bearing
6743-31-3120
3120-01-602-8199
Sleeve Bushing