3120-01-204-4798 Sleeve Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-01-204-4798.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-01-204-4798. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-01-204-4798
- اسم العنصر الكود
- 13205
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 03/27/1985
قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.
1.0000 inches nominal flange outside diameter, 0.4990 inches minimum and 0.4995 inches maximum body outside diameter, 0.0250 inches minimum and 0.0300 inches maximum flange width, square all corners corner shape, 0.3750 inches minimum and 0.3770 inches maximum body inside diameter
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-204-4798 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- القطر الداخلي للجسم
- 0.3750 inches minimum and 0.3770 inches maximum
- القطر الخارجي للجسم
- 0.4990 inches minimum and 0.4995 inches maximum
- شكل الزاوية
- square all corners
- القطر الخارجي للشفة
- 1.0000 inches nominal
- عرض الشفة
- 0.0250 inches minimum and 0.0300 inches maximum
- الطول الإجمالي
- 2.1380 inches nominal
- وثيقة المواد والتصنيف
- ams 5643 assn std single material response overall
- مادة
- steel comp 630 overall
- مُحدد الأسلوب
- solid, external flange one end
- تشطيب السطح
- 32.0 microinches right end surface of left flange
- تشطيب السطح
- 8.0 microinches outside diameter surface of body
- وثيقة بيانات الاختبار
- "76301-ps21202,class a specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."
يستبدل
The NSN 3120-01-204-4798 is used in place of the following discontinued or alternate items:
| NSN | اسم | تاريخ |
|---|---|---|
| 3120-01-128-1606 | No Name Available | 10/01/1987 |
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
| رقم القطعة | اسم |
|---|---|
| 10108234 | Sleeve Bearing |
| 74A661270-2011 | Sleeve Bearing |
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-01-204-4798. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-01-204-4798?
- The FSCG of the NSN 3120-01-204-4798 is 3120
- Does the NSN 3120-01-204-4798 have a Schedule B code assigned?
- Yes, the Schedule B code is 8482997090
- Does NSN 3120-01-204-4798 require demilitarization?
- "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"
- Does NSN 3120-01-204-4798 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-204-4798 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-204-4798 was assigned to the Federal Catalog?
- It was assigned منذ 41 سنة, on Wed, Mar 27, 1985