SSN637-501-2143862 PC 16 AND 17

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: SSN637-501-2143862 PC 16 AND 17 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: SSN637-501-2143862 PC 16 AND 17. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
SSN637-501-2143862 PC 16 AND 17
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-211-0756
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
06/20/1985

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

4.0000 inches nominal left flange outside diameter, 2.8750 inches nominal body outside diameter, 2.5000 inches minimum and 2.5020 inches maximum body inside diameter, 0.1250 inches nominal left flange width, square all corners corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-211-0756 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
2.5000 inches minimum and 2.5020 inches maximum
القطر الخارجي للجسم
2.8750 inches nominal
شكل الزاوية
square all corners
القطر الخارجي للشفة اليسرى
4.0000 inches nominal
عرض الشفة اليسرى
0.1250 inches nominal
نمط الإقامة في مواد التشحيم
grooved circular
الطول الإجمالي
1.9960 inches minimum and 1.9980 inches maximum
وثيقة المواد والتصنيف
bearium b-8,fscm 85373 mfr ref single material response overall
مادة
copper alloy overall
القطر الخارجي للشفة اليمنى
4.0000 inches nominal
عرض الشفة اليمنى
0.1230 inches nominal
الميزات الخاصة
urethane rubber segmented bushing,3.820 in. dia od,2.875 in. dia id,1.590 in. id width tapered to 1.500 in. od width,bonded to od of body
مُحدد الأسلوب
segmented, external flanges both ends
تشطيب السطح
32.0 microinches left end surface of body and flange
تشطيب السطح
32.0 microinches inside diameter surface of body
تشطيب السطح
32.0 microinches right end surface of body and flange
موقع الأخدود السطحي والكمية
1 internal

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: SSN637-501-2143862 PC 16 AND 17. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-211-0756?
The FSCG of the NSN 3120-01-211-0756 is 3120
Does the NSN 3120-01-211-0756 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-211-0756 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-211-0756 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-211-0756 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-211-0756 was assigned to the Federal Catalog?
It was assigned منذ 40 سنة, on Thu, Jun 20, 1985

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: SSN637-501-2143862 PC 16 AND 17

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

23172CACMC2W33
3110-01-335-9557
Self-Aligning Roller Bearing
23172H
3110-00-120-4289
Bearing Roller
231742-9
3110-00-293-9302
Annular Ball Bearing
23175-562
3110-00-055-2100
Bearing Seat
231759-46
3110-00-144-8669
Annular Ball Bearing
231759-78
3110-00-144-8519
Annular Ball Bearing
23176-208510-04-0
3110-00-906-1707
Needle Roller Bearing
23176-208520-04-0
3110-00-494-9259
Needle Roller Bearing
231768-3
3110-00-554-5656
Annular Ball Bearing
231775
3110-01-506-8226
Bearing Retaining Plate
231776-21
3110-00-144-8954
Annular Ball Bearing
231779
3110-01-064-4124
Cylindrical Roller Bearing
23178
3130-01-191-7364
Pillow Block Cap
231780
3110-01-029-8085
Tapered Roller Bearing
231782-47
3110-00-155-6198
Annular Ball Bearing