07-414-04-007E-005

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 07-414-04-007E-005 Sleeve Bushing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 07-414-04-007E-005. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
07-414-04-007E-005
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-215-9842
اسم العنصر الكود
13206
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
09/04/1985

قطعة أنبوبية الشكل غير ملولبة، مزودة أو بدون شفة في أحد طرفيها، مصممة لإدخالها في ثقب لتقليل القطر الداخلي للثقب وحماية هيكل الجسم المحيط من التلف الناتج عن الإجهاد أو الانفعال أو الاهتزاز. يجب أن يتجاوز الطول الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم. تشمل القطع المقسمة إلى جزأين أو أكثر، بما في ذلك محيط المحمل بزاوية 180 درجة (3.141 راديان) أو أقل. للقطع المصنوعة من المطاط، انظر: جلبة غير معدنية. انظر أيضًا: جلبة محمل؛ جلبة مدببة؛ فاصل جلبة؛ عازل جلبة؛ جلبة موصلة للكهرباء. لا يشمل: جلبة مثقاب؛ قالب تثبيت.

0.2640 inches minimum and 0.2660 inches maximum body inside diameter, 0.3720 inches minimum and 0.3730 inches maximum body outside diameter, square left flange body corner corner shape, chamfered inside right corner corner shape, engine, aircraft, f110-ge-100/129 (f-16 c/d); engine, f118-ge-100 (b-2 bomber); engine, aircraft, f-108 (cfm-56, kc-135a) end item identification

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-215-9842 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

تحديد العنصر النهائي
engine, aircraft, f110-ge-100/129 (f-16 c/d); engine, f118-ge-100 (b-2 bomber); engine, aircraft, f-108 (cfm-56, kc-135a)
القطر الداخلي للجسم
0.2640 inches minimum and 0.2660 inches maximum
القطر الخارجي للجسم
0.3720 inches minimum and 0.3730 inches maximum
شكل الزاوية
chamfered inside right corner
شكل الزاوية
square left flange body corner
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square outside right corner
القطر الخارجي للشفة
0.4800 inches minimum and 0.5200 inches maximum
عرض الشفة
0.0280 inches minimum and 0.0320 inches maximum
الطول الإجمالي
0.2180 inches minimum and 0.2620 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
وثيقة المواد والتصنيف
fabroid x,fscm 09455 mfr ref single material response inner layer
مادة
plastic polyamide (nylon) and glass fiber and resin synthetic inner layer
مادة
steel comp 630 outer layer
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
63.0 microinches inside diameter surface of body
تشطيب السطح
63.0 microinches left end surface of body and flange
تشطيب السطح
63.0 microinches outside diameter surface of body
تشطيب السطح
63.0 microinches right end surface of left flange

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 07-414-04-007E-005. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-215-9842?
The FSCG of the NSN 3120-01-215-9842 is 3120
Does the NSN 3120-01-215-9842 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997060
Does NSN 3120-01-215-9842 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-215-9842 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-215-9842 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-215-9842 was assigned to the Federal Catalog?
It was assigned منذ 39 سنة, on Wed, Sep 4, 1985

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 07-414-04-007E-005

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

3090806-1
3110-01-346-0569
Cylindrical Roller Bearing
3090807-1
3110-01-347-6867
Duplex Ball Bearing
3090808-1
3110-01-346-2088
Cylindrical Roller Bearing
3090809-1
3110-01-347-6861
Annular Ball Bearing
3090810-1
3110-01-347-6862
Annular Ball Bearing
3090811-1
3110-01-346-5637
Cylindrical Roller Bearing
3090828-1
3110-01-347-6877
Bearing Retaining Plate
30910
3120-00-353-1710
Sleeve Bearing
3091016-1
3110-01-347-6864
Thrust Ball Bearing
3091017-1
3110-01-347-2128
Cylindrical Roller Bearing
3091018-1
3110-01-346-0567
Cylindrical Roller Bearing
3091020-1
3110-01-346-0568
Cylindrical Roller Bearing
3091021-2
3110-01-346-5635
Annular Ball Bearing
3091069-3
3120-01-345-5088
Sleeve Bushing
3091113-1
3130-01-346-5823
Bearing Housing Liner