5765851 ITEM 26

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 5765851 ITEM 26 Rod End Plain Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 5765851 ITEM 26. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
5765851 ITEM 26
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-217-9165
اسم العنصر الكود
13209
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
10/05/1985

مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.

0.4995 inches minimum and 0.5000 inches maximum bore diameter, 0.6200 inches minimum and 0.6250 inches maximum inner member width, 3.0940 inches nominal overall length, self-lubricating liner race liner lubrication feature, 2.4280 inches minimum and 2.4480 inches maximum bore center to shank end distance

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-217-9165 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

قطر التجويف
0.4995 inches minimum and 0.5000 inches maximum
المسافة من مركز التجويف إلى نهاية الساق
2.4280 inches minimum and 2.4480 inches maximum
عرض العضو الداخلي
0.6200 inches minimum and 0.6250 inches maximum
ميزة التزييت
self-lubricating liner race liner
الطول الإجمالي
3.0940 inches nominal
وثيقة المواد والتصنيف
dyflon,fscm 81376 mfr ref single material response race liner
وثيقة المواد والتصنيف
qq-c-465 fed spec single material response inner member
وثيقة المواد والتصنيف
qq-n-286 fed spec single material response race insert
وثيقة المواد والتصنيف
qq-n-286 fed spec single material response rod end body
مادة
copper alloy 632 inner member
مادة
nickel alloy k-500 race insert
مادة
nickel alloy k-500 rod end body
مادة
plastic polytetrafluoroethylene race liner
القطر الخارجي للعضو الخارجي
1.3020 inches minimum and 1.3220 inches maximum
عرض العضو الخارجي
0.5100 inches minimum and 0.5200 inches maximum
طول خيط الساق
1.4868 inches minimum and 1.5625 inches maximum
نمط الساق
externally threaded
الميزات الخاصة
one hole in shank 0.170 in. deep,0.370 in. from shank bottom to center for 0.169 in. dia plastic locking pellet
تصنيف الحمل الشعاعي الثابت
6600 pounds
مُحدد الأسلوب
ball type
فئة الخيط
3a
قطر الخيط
0.5000 inches nominal
اتجاه الخيط
right-hand
كمية الخيوط لكل بوصة
20
مُعَيِّن سلسلة الخيوط
unf

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 5765851 ITEM 26. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-217-9165?
The FSCG of the NSN 3120-01-217-9165 is 3120
Does the NSN 3120-01-217-9165 have a Schedule B code assigned?
Yes, the Schedule B code is 8483308055
Does NSN 3120-01-217-9165 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-217-9165 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-217-9165 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-217-9165 was assigned to the Federal Catalog?
It was assigned منذ 39 سنة, on Sat, Oct 5, 1985

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 5765851 ITEM 26

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

4D0035N20C035
3120-01-419-3053
Sleeve Bushing
4D0035N20C038
3120-01-419-5055
Sleeve Bushing
4D0035N20C042
3120-01-458-3261
Sleeve Bushing
4D0035N22C024
3120-01-419-3118
Sleeve Bushing
4D0035N22C029
3120-01-419-4660
Sleeve Bushing
4D0035N22C030
3120-01-419-3110
Sleeve Bushing
4D0035N22C035
3120-01-419-4088
Sleeve Bushing
4D0035N26C030
3120-01-419-3047
Sleeve Bushing
4D0035N26C036
3120-01-419-4104
Sleeve Bushing
4D0035N26C047
3120-01-419-4795
Sleeve Bushing
4D0035N26C052
3120-01-419-3537
Sleeve Bushing
4D0035N4-015
3120-01-344-9680
Sleeve Bushing
4D0035N4-016
3120-01-345-1860
Sleeve Bushing
4D0035N4-018
3120-01-344-9681
Sleeve Bushing
4D0035N4-019
3120-01-344-9682
Sleeve Bushing