M81934/1-24A012

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: M81934/1-24A012 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: M81934/1-24A012. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
M81934/1-24A012
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-329-6502
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
11/20/1990

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

1.5005 inches minimum and 1.5015 inches maximum body inside diameter, qq-a-200/3,t8511 fed spec single material response or qq-a-225/6,t851 fed spec single material response outer layer material document and classification, 0.3650 inches minimum and 0.3750 inches maximum overall length, 1.7518 inches minimum and 1.7528 inches maximum body outside diameter, square all corners corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-329-6502 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
1.5005 inches minimum and 1.5015 inches maximum
القطر الخارجي للجسم
1.7518 inches minimum and 1.7528 inches maximum
شكل الزاوية
square all corners
الطول الإجمالي
0.3650 inches minimum and 0.3750 inches maximum
وثيقة المواد والتصنيف
qq-a-200/3,t8511 fed spec single material response or qq-a-225/6,t851 fed spec single material response outer layer
مادة
aluminum alloy 2024 outer layer
مادة
plastic polytetrafluoroethylene inner layer
مُحدد الأسلوب
solid, plain, no outside flanges
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches left end surface of body
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
63.0 microinches outside diameter surface of body
وثيقة معالجة السطح والتصنيف
mil-a-8625,ty 1 mil spec 1st treatment response or mil-a-8625,ty 2 mil spec 1st treatment response or mil-c-5541 mil spec 2nd treatment response outer layer
معالجة السطح
anodize or chromate outer layer

يستبدل

The NSN 3120-01-329-6502 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-040-9251 No Name Available 02/01/1998

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: M81934/1-24A012. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-329-6502?
The FSCG of the NSN 3120-01-329-6502 is 3120
Does the NSN 3120-01-329-6502 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-329-6502 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-329-6502 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-329-6502 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-329-6502 was assigned to the Federal Catalog?
It was assigned منذ 34 سنة, on Tue, Nov 20, 1990

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: M81934/1-24A012

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

2789P11
3120-00-661-9253
Sleeve Bearing
278D521P8
3130-01-009-5865
Bearing Unit Housing
278P
3120-00-420-5420
Sleeve Bushing
279
3110-00-100-0704
Tapered Roller Cone and Rollers
2790
3110-00-100-0745
Tapered Roller Cone and Rollers
2790-2720
3110-00-100-4477
Tapered Roller Bearing
2790-438
3120-00-287-7397
Sleeve Bearing
2790068
3120-01-421-3246
Sleeve Bearing
279009
3110-01-045-2322
Annular Ball Bearing
27901H
3110-00-100-0694
Tapered Roller Cone and Rollers
27902H
3110-00-100-4418
Tapered Roller Bearing
27908-2
3120-01-419-9434
Sleeve Bearing
27909
3110-01-270-7165
Annular Ball Bearing
2791256
3120-01-421-3226
Sleeve Bearing
27914
3110-00-151-9146
Bearing Ball