KDJ09A020-241

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: KDJ09A020-241 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: KDJ09A020-241. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
KDJ09A020-241
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-354-8269
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
03/06/1992

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

0.6887 inches minimum and 0.6897 inches maximum body outside diameter, square inside left corner corner shape, square left flange outside right corner corner shape, 0.5630 inches minimum and 0.5640 inches maximum body inside diameter, square outside left corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-354-8269 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
0.5630 inches minimum and 0.5640 inches maximum
القطر الخارجي للجسم
0.6887 inches minimum and 0.6897 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.1050 inches minimum and 1.1250 inches maximum
عرض الشفة
0.0575 inches minimum and 0.0625 inches maximum
الطول الإجمالي
0.6725 inches minimum and 0.6875 inches maximum
وثيقة المواد والتصنيف
qq-a-200/3,t8511 fed spec single material response or qq-a-225/6,t851 fed spec single material response outer layer
مادة
aluminum alloy 2024 outer layer
مادة
plastic polytetrafluoroethylene inner layer
الميزات الخاصة
plastic liner bonded to left end of surface of flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body
وثيقة معالجة السطح والتصنيف
mil-c-5541 mil spec single treatment response outer layer
معالجة السطح
chromate outer layer

يستبدل

The NSN 3120-01-354-8269 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-230-6209 No Name Available 08/01/2007

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: KDJ09A020-241. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-354-8269?
The FSCG of the NSN 3120-01-354-8269 is 3120
Does the NSN 3120-01-354-8269 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-354-8269 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-354-8269 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-354-8269 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-354-8269 was assigned to the Federal Catalog?
It was assigned منذ 33 سنة, on Fri, Mar 6, 1992

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: KDJ09A020-241

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

11778606
3110-01-210-0842
Annular Ball Bearing
11778608
3110-01-076-2342
Annular Ball Bearing
11778609
3110-01-074-9177
Annular Ball Bearing
11778610
3110-01-077-2670
Annular Ball Bearing
117791
3110-00-227-3101
Annular Ball Bearing
1177PC10
3130-00-419-0887
Ball Bearing Unit
1178-1
3130-01-232-7485
Roller Bearing Unit
1178-40
3120-00-231-5144
Sleeve Bushing
11780
3120-00-957-3310
Thrust Washer Bearing
11780-047-01
3120-01-272-6491
Sleeve Bearing
11780-049-01
3120-01-176-7431
Thrust Washer Bearing
11780111-3
3120-01-083-2378
Sleeve Bearing
11780271
3120-01-102-1531
Sleeve Bushing
11780272
3120-01-098-2165
Sleeve Bushing
11780291-06
3120-01-076-8172
Sleeve Bushing