KDJ18C010-241

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: KDJ18C010-241 Sleeve Bearing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: KDJ18C010-241. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
KDJ18C010-241
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-354-8276
اسم العنصر الكود
13205
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
03/06/1992

قطعة أنبوبية الشكل، مزودة أو بدون شفة (أو شفات)، مصممة لتقليل الاحتكاك وتحمل حملاً حركياً على السطح (الأسطح) الموازي لمحور التجويف. يجب أن تكون مزودة بوسيلة تزييت مرئية أو قابلة للكشف، أو ذاتية التزييت. يجب أن يتجاوز طولها الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم، باستثناء القطع الأنبوبية المستقيمة (بدون شفة أو كتف) التي تحتوي على سطح (أسطح) محمل موازٍ لمحور التجويف فقط. تشمل القطع المقسومة إلى جزأين أو أكثر، بحيث تتضمن 180 درجة (3.141 راديان) أو أقل من محيط المحمل. انظر أيضاً: الجلبة، والكم؛ والفاصل، والكم؛ والغسالة (بصيغتها المعدلة). لا يشمل: الدبوس، المجوف.

square outside left corner corner shape, 1.1255 inches minimum and 1.1265 inches maximum body inside diameter, 1.3143 inches minimum and 1.3148 inches maximum body outside diameter, square inside left corner corner shape, square left flange outside right corner corner shape

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-354-8276 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

القطر الداخلي للجسم
1.1255 inches minimum and 1.1265 inches maximum
القطر الخارجي للجسم
1.3143 inches minimum and 1.3148 inches maximum
شكل الزاوية
square left flange outside right corner
شكل الزاوية
square outside left corner
شكل الزاوية
square inside left corner
شكل الزاوية
square inside right corner
شكل الزاوية
square outside right corner
شكل الزاوية
undercut left flange body corner
القطر الخارجي للشفة
1.8550 inches minimum and 1.8750 inches maximum
عرض الشفة
0.0887 inches minimum and 0.0937 inches maximum
الطول الإجمالي
0.3912 inches minimum and 0.4062 inches maximum
وثيقة المواد والتصنيف
ams 5643 assn std single material response outer layer
مادة
plastic polytetrafluoroethylene inner layer
مادة
steel comp 630 outer layer
الميزات الخاصة
plastic liner bonded to left end surface of flange
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches inside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches outside diameter surface of body

يستبدل

The NSN 3120-01-354-8276 is used in place of the following discontinued or alternate items:

NSN اسم تاريخ
3120-00-006-4810 No Name Available 06/01/2007

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: KDJ18C010-241. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-354-8276?
The FSCG of the NSN 3120-01-354-8276 is 3120
Does the NSN 3120-01-354-8276 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997090
Does NSN 3120-01-354-8276 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-354-8276 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-354-8276 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-354-8276 was assigned to the Federal Catalog?
It was assigned منذ 33 سنة, on Fri, Mar 6, 1992

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: KDJ18C010-241

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

LS3859-4P32
3120-00-421-0503
Sleeve Bushing
LS3859-4P5
3120-00-435-1028
Sleeve Bushing
LS3859-4P6
3120-00-492-2331
Sleeve Bushing
LS3859-4P7
3120-01-323-2963
Sleeve Bushing
LS3859-4P8
3120-00-146-2611
Sleeve Bushing
LS3859-4P9
3120-00-137-7167
Sleeve Bushing
LS3859-4PP10
3120-00-156-1504
Sleeve Bushing
LS3859-4PP11
3120-00-093-6627
Sleeve Bushing
LS3859-4PP12
3120-00-338-0440
Sleeve Bushing
LS3859-4PP26
3120-00-492-2568
Sleeve Bushing
LS3859-4PP4
3120-01-046-3379
Sleeve Bushing
LS3859-4PP48
3120-00-500-2396
Sleeve Bushing
LS3859-4PP5
3120-00-500-2329
Sleeve Bushing
LS3859-4PP6
3120-00-492-2331
Sleeve Bushing
LS3859-4PP7
3120-00-492-2567
Sleeve Bushing