3120-01-459-4892 Rod End Plain Bearing
المواصفات الشاملة وتفاصيل التطبيق لـ NSN: 3120-01-459-4892.
ملخص
استكشف معلومات موجزة مفصلة عن المحمل: 3120-01-459-4892. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.
- تصنيف الإمدادات الفيدرالية
- 3120 محامل عادية غير مثبتة
- (NSN) رقم المخزون الوطني
- 3120-01-459-4892
- اسم العنصر الكود
- 13209
- دليل تحديد العناصر الفيدرالية
- A045A0
- تاريخ التعيين
- 10/03/1998
مجموعة قابلة للفصل، تتحرك داخلها أو عليها، أو عليها دعامة، أو مفصل، أو محور، أو ما شابه. تُستخدم لحمل الأحمال وتقليل الاحتكاك الانزلاقي. لا تستخدم عناصر دوارة. الجزء الخارجي من المجموعة مُعدّل لتوفير ساق. الجزء الداخلي قد يكون محملًا كرويًا عاديًا أو محملًا كميًا. لا يشمل: المحمل العادي، الكروي، والمحمل العادي، ذاتي المحاذاة.
0.8700 inches minimum and 0.8750 inches maximum inner member width, ams 5630 assn std single material response race insert material document and classification, 0.4370 inches minimum and 0.4375 inches maximum bore diameter, defense support program end item identification, 2.4070 inches minimum and 2.4690 inches maximum bore center to shank end distance
ورقة البيانات
فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-459-4892 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.
- تحديد العنصر النهائي
- defense support program
- قطر التجويف
- 0.4370 inches minimum and 0.4375 inches maximum
- المسافة من مركز التجويف إلى نهاية الساق
- 2.4070 inches minimum and 2.4690 inches maximum
- عرض العضو الداخلي
- 0.8700 inches minimum and 0.8750 inches maximum
- وثيقة المواد والتصنيف
- ams 5630 assn std single material response race insert
- وثيقة المواد والتصنيف
- ams 5630 assn std single material response inner member
- وثيقة المواد والتصنيف
- ams 5643 assn std single material response body
- وثيقة المواد والتصنيف
- mil-b-81820 mil spec single material response bore liner
- مادة
- plastic polytetrafluoroethylene bore liner
- مادة
- steel body
- مادة
- steel comp 440c inner member
- مادة
- steel race insert
- القطر الخارجي للعضو الخارجي
- 1.3020 inches minimum and 1.3220 inches maximum
- عرض العضو الخارجي
- 0.3500 inches minimum and 0.3600 inches maximum
- الميزات الخاصة
- keyway
- مُحدد الأسلوب
- ball type
- فئة الخيط
- 3a
- قطر الخيط
- 0.5000 inches nominal
- اتجاه الخيط
- left-hand
- كمية الخيوط لكل بوصة
- 20
- مُعَيِّن سلسلة الخيوط
- unjf
المحامل ذات الصلة
استكشف نماذج المحامل المختلفة المرتبطة ب NSN هذا. انقر فوق أي محمل أدناه لعرض البيانات الفنية التفصيلية وتقييمات الأداء وإرشادات التطبيق.
| رقم القطعة | اسم |
|---|---|
| 4D0052-7LW | Rod End Plain Bearing |
| AKYML7-3001W | Rod End Plain Bearing |
| ASMK-7T-32 | Rod End Plain Bearing |
| KSR148800-7LW | Rod End Plain Bearing |
| SWRKMLHS-7-145 | Rod End Plain Bearing |
الأسئلة الشائعة
ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 3120-01-459-4892. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.
- What is the FSCG of the NSN 3120-01-459-4892?
- The FSCG of the NSN 3120-01-459-4892 is 3120
- Does the NSN 3120-01-459-4892 have a Schedule B code assigned?
- Yes, the Schedule B code is 8483308055
- Does NSN 3120-01-459-4892 require demilitarization?
- Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
- Does NSN 3120-01-459-4892 contain precious materials?
- Item does not contain precious metal.
- Does NSN 3120-01-459-4892 contain hazardous materials?
- Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
- When the NSN 3120-01-459-4892 was assigned to the Federal Catalog?
- It was assigned منذ 27 سنة, on Sat, Oct 3, 1998