9-61961-4

المواصفات الشاملة وتفاصيل التطبيقات المتعلقة بما يلي: 9-61961-4 Sleeve Bushing.

ملخص

استكشف معلومات موجزة مفصلة عن المحمل: 9-61961-4. يتضمن NSN ومجموعة التصنيف وأكواد التعريف لدعم المصادر والامتثال وتتبع الأجزاء بدقة.

رقم القطعة
9-61961-4
تصنيف الإمدادات الفيدرالية
3120 محامل عادية غير مثبتة
(NSN) رقم المخزون الوطني
3120-01-560-6661
اسم العنصر الكود
13206
دليل تحديد العناصر الفيدرالية
A045A0
تاريخ التعيين
02/07/2008

قطعة أنبوبية الشكل غير ملولبة، مزودة أو بدون شفة في أحد طرفيها، مصممة لإدخالها في ثقب لتقليل القطر الداخلي للثقب وحماية هيكل الجسم المحيط من التلف الناتج عن الإجهاد أو الانفعال أو الاهتزاز. يجب أن يتجاوز الطول الإجمالي 25% من القطر الخارجي أو أقصر مسافة بين الأسطح الطرفية للجسم. تشمل القطع المقسمة إلى جزأين أو أكثر، بما في ذلك محيط المحمل بزاوية 180 درجة (3.141 راديان) أو أقل. للقطع المصنوعة من المطاط، انظر: جلبة غير معدنية. انظر أيضًا: جلبة محمل؛ جلبة مدببة؛ فاصل جلبة؛ عازل جلبة؛ جلبة موصلة للكهرباء. لا يشمل: جلبة مثقاب؛ قالب تثبيت.

5.5600 inches nominal body inside diameter, c-135 aircraft; bushing-main landing gear, fwd trunnion end item identification, 0.1650 inches minimum and 0.1750 inches maximum flange width, 7.2500 inches nominal flange outside diameter, 6.3572 inches minimum and 6.3593 inches maximum body outside diameter

ورقة البيانات

فيما يلي المواصفات الفنية الشاملة للمحمل: 3120-01-560-6661 . ابحث عن الأبعاد والمواد والتسامحات وخصائص الأداء وما إلى ذلك.

تحديد العنصر النهائي
c-135 aircraft; bushing-main landing gear, fwd trunnion
القطر الداخلي للجسم
5.5600 inches nominal
القطر الخارجي للجسم
6.3572 inches minimum and 6.3593 inches maximum
القطر الخارجي للشفة
7.2500 inches nominal
عرض الشفة
0.1650 inches minimum and 0.1750 inches maximum
الطول الإجمالي
1.0800 inches nominal
اسم الجزء المخصص من قبل الوكالة المسيطرة
bushing fwd 1st over
وثيقة المواد والتصنيف
mil-b-6946 cold drawn mil spec single material response or qq-b-671, class 3 ht tr fed spec single material response or qq-b-671 class 4 ht tr fed spec single material response overall
مادة
copper alloy 630 or copper alloy 954 or copper alloy 955 overall
مُحدد الأسلوب
solid, external flange one end
تشطيب السطح
125.0 microinches outside diameter surface of body
تشطيب السطح
125.0 microinches outside diameter surface of flange
تشطيب السطح
125.0 microinches left end surface of body and flange
تشطيب السطح
125.0 microinches right end surface of body
تشطيب السطح
125.0 microinches right end surface of left flange
تشطيب السطح
63.0 microinches inside diameter surface of body
وثيقة معالجة السطح والتصنيف
ams-aa-99-416, type ii, class 3(preferred) assn std single treatment response or ams 2417, type 1 or type 2 assn std single treatment response or ams 2451/4 or 3 assn std single treatment response or ams 2451/9, type 1 or type 2 assn std single treatment response left end surface of body and flange
وثيقة معالجة السطح والتصنيف
ams-qq-pp-416, type ii, class 3(preferred) assn std single treatment response or ams 2417, type 1 or type 2 assn std single treatment response or ams 2451/4 or 3 assn std single treatment response or ams 2451/9, type 1 or type 2 assn std single treatment response outside diameter surface of flange
وثيقة معالجة السطح والتصنيف
ams-qq-pp-416, type ii, class 3(preferred) assn std single treatment response or ams 2417, type 1 or type 2 assn std single treatment response or ams 2451/4 or 3 assn std single treatment response or ams 2451/9, type 1 or type 2 assn std single treatment response right end surface of body
وثيقة معالجة السطح والتصنيف
ams-qq-pp-416, type ii, class 3(preferred) assn std single treatment response or ams 2417, type 1 or type 2 assn std single treatment response or ams 2451/4 or 3 assn std 1st treatment response or ams 2451/9, type 1 or type 2 assn std single treatment response outside diameter surface of body
وثيقة معالجة السطح والتصنيف
ams-qq-pp-416, type ii, class 3(preferred) assn std single treatment response or ams 2417, type 1 or type 2 assn std single treatment response or ams 2451/4 or 3 assn std single treatment response or ams 2451/9, type 1 or type 2 assn std single treatment response right end surface of left flange
معالجة السطح
cadmium or zinc and nickel left end surface of body and flange
معالجة السطح
cadmium or zinc and nickel outside diameter surface of body
معالجة السطح
cadmium or zinc and nickel outside diameter surface of flange
معالجة السطح
cadmium or zinc and nickel right end surface of body
معالجة السطح
cadmium or zinc and nickel right end surface of left flange

الأسئلة الشائعة

ابحث عن إجابات سريعة للأسئلة الشائعة حول المحمل: 9-61961-4. استكشف المواصفات الفنية ونصائح التثبيت وإرشادات الصيانة والمتطلبات التنظيمية ونصائح استكشاف الأخطاء وإصلاحها.

What is the FSCG of the NSN 3120-01-560-6661?
The FSCG of the NSN 3120-01-560-6661 is 3120
Does the NSN 3120-01-560-6661 have a Schedule B code assigned?
Yes, the Schedule B code is 8482997060
Does NSN 3120-01-560-6661 require demilitarization?
Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Does NSN 3120-01-560-6661 contain precious materials?
Item does not contain precious metal.
Does NSN 3120-01-560-6661 contain hazardous materials?
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
When the NSN 3120-01-560-6661 was assigned to the Federal Catalog?
It was assigned منذ 17 سنة, on Thu, Feb 7, 2008

السعر والتوافر

قم بملء النموذج للحصول على تفاصيل الأسعار والتوافر للمحمل: 9-61961-4

المحامل الشعبية

تصفح مجموعتنا المختارة من المحامل عالية الطلب وعالية الأداء:

R143.5 ITEM 8
3130-01-449-7612
Roller Bearing Unit
R1433Z
3110-00-973-8166
Annular Ball Bearing
R14385
3110-00-142-4371
Tapered Roller Bearing Cup
R1438ZZRA1P811LY
3110-00-526-2063
Annular Ball Bearing
R145
3110-00-155-7350
Cylindrical Roller Bearing
R1466
3110-00-156-7721
Needle Roller Bearing
R147PC6
3110-00-555-5429
Annular Ball Bearing
R147PC7
3110-00-156-6790
Annular Ball Bearing
R1486
3110-00-156-7721
Needle Roller Bearing
R14896
3120-00-570-9594
Sleeve Bushing
R148PC4
3120-00-661-3510
Sleeve Bearing
R1492
3110-00-100-0260
Tapered Roller Cone and Rollers
R1498
3110-00-554-3358
Annular Ball Bearing
R1498-22B
3110-00-554-3358
Annular Ball Bearing
R1499
3110-00-155-6416
Annular Ball Bearing