قطعة ذات أي شكل محيطي، عادةً ما يكون لها سطح مستوٍ أو كروي وفتحة مركزية. صُممت هذه القطعة للتطبيقات التي تتضمن أحمالًا متحركة (حركية). باستثناء القطع المصنوعة من مواد صناعية عالية الجودة (بلاستيك) أو المصنوعة من مواد متعددة الطبقات، يجب أن يكون لسطح المحمل إما سماكة سطح محددة تبلغ 32 ميكروبوصة (0.8 ميكرومتر) أو أقل، أو المتوسط الحسابي (aa) (انحراف المتوسط الحسابي)، أو أحد الشروط التالية: أن تكون متداخلة أو مصقولة؛ أو أن يكون لها وسائل تزييت مرئية أو قابلة للكشف؛ أو أخاديد أو انبعاجات؛ أو تزييت ذاتي. يجب ألا يتجاوز سمك القطعة 25% من القطر الخارجي لأقصر مسافة بين الأسطح المحيطية (عندما يُحدد السمك و/أو القطر الخارجي كبُعد تسامح، يُستخدم الحد الأقصى للبعد لتحديد مدى التوافق). لا يشمل هذا البند القطع المستقيمة الأنبوبية (بدون شفة) ذات سطح (أسطح) المحمل الموازي لمحور التجويف فقط. انظر أيضًا: الغسالة، والمسطحة، والفاصل، والجلبة.
retainer, bearing part name assigned by controlling agency, operator housing assy. lockout ballscrew assembly. end item identification, (1) at assembly thread bearing retainer pn 12 onto the ball screw nut pn 2 as close to flush as possible with end of ballnut thread. see section 11-58. lubricate threads on the ballscrew nut pn 2 with aeroshell no 22 per dod-g-24508 (eb pn 52-06-37258). (2) position pn 12, locating (8) 0.406 diameter holes 22.5 degrees from 0.687 diameter hole in pn 31 and 0.500 keyways in pn 3. see section 10-2e. special features, material controlled iaw ss800-ag-man-010/p-9290 system certification procedures and criteria manual for deep submergence systems. critical item for safety and survival of deep submergence research and rescue vehicles as differentiated by special test features. reference number differentiating characteristics, zzzy criticality code justification