What is the FSCG of the NSN 3130-01-239-3655?

The FSCG of the NSN 3130-01-239-3655 is 3130

Does the NSN 3130-01-239-3655 have a Schedule B code assigned?

Yes, the Schedule B code is 8482991050

Does NSN 3130-01-239-3655 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3130-01-239-3655 contain precious materials?

Item does not contain precious metal.

Does NSN 3130-01-239-3655 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3130-01-239-3655 was assigned to the Federal Catalog?

It was assigned 38 years ago, on Thu, Aug 28, 1986

06872-9H-1-11/16 | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: 06872-9H-1-11/16. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: 06872-9H-1-11/16
Federal Supply Classification: 3130 Mounted Bearings
(NSN) National Stock Number: 3130-01-239-3655
Item Name Code: 30556
Federal Item Identification Guide: A093A0
Assigment Date: 08/28/1986

An assembled unit, composed of a housing incorporating a single or multiple row ball bearing(s), designed to meet various or specific conditions of mounting.

1.6875 inches minimum and 1.6887 inches maximum bore diameter, rigid alignment type, 1.312 inches nominal base thickness, 2.125 inches nominal base length, fixed block type

Datasheet

Below are the comprehensive technical specifications for bearing: 3130-01-239-3655 . Find dimensions, materials, tolerances, performance characteristics, etc.

Alignment Type: rigid
Base Length: 2.125 inches nominal
Base Thickness: 1.312 inches nominal
Block Type: fixed
Bore Diameter: 1.6875 inches minimum and 1.6887 inches maximum
Center To Center Distance Between Mounting Holes Along Width: 5.562 inches minimum and 6.125 inches maximum
Collar Location: one end
Height From Bottom Of Base To Bore Centerline: 2.125 inches nominal
Housing Height: 4.312 inches nominal
Housing Length: 2.438 inches nominal
Housing Width: 7.750 inches nominal
Internal Fit-Up Designation: standard
Load Capability Type: radial
Lubrication Material: grease
Lubrication Fitting Angle From Horizontal Centerline: 45.0 degrees nominal
Lubrication Fitting Type: hydraulic
Material: iron cast housing
Material: rubber synthetic seal
Mounting Hole Diameter: 0.500 inches nominal
Mounting Hole Type: round, unthreaded
Rolling Element Groove Quantity: 1
Rotating Element Locking Method: setscrew locking collar
Seal Location: both ends
Seal Type: contact
Shaft End Type: open
Style Designator: pillow block, solid

Frequently Asked Questions

Find quick answers to common questions about bearing: 06872-9H-1-11/16. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3130-01-239-3655?: The FSCG of the NSN 3130-01-239-3655 is 3130

Does the NSN 3130-01-239-3655 have a Schedule B code assigned?: Yes, the Schedule B code is 8482991050

Does NSN 3130-01-239-3655 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3130-01-239-3655 contain precious materials?: Item does not contain precious metal.

Does NSN 3130-01-239-3655 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.