What is the FSCG of the NSN 3110-00-057-0630?

The FSCG of the NSN 3110-00-057-0630 is 3110

Does the NSN 3110-00-057-0630 have a Schedule B code assigned?

Yes, the Schedule B code is 8482105028

Does NSN 3110-00-057-0630 require demilitarization?

Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-057-0630 contain precious materials?

Precious metal content is unknown

Does NSN 3110-00-057-0630 contain hazardous materials?

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

When the NSN 3110-00-057-0630 was assigned to the Federal Catalog?

It was assigned 58 years ago, on Tue, Jun 6, 1967

Z99036RLR3LU699YH | Aerospace-Bearing

Summary

Explore detailed summary information for bearing: Z99036RLR3LU699YH. Includes NSN, classification group, and identification codes to support sourcing, compliance, and accurate part tracking.

Part Number: Z99036RLR3LU699YH
Federal Supply Classification: 3110 Unmounted Antifriction Bearings
(NSN) National Stock Number: 3110-00-057-0630
Item Name Code: 00014
Federal Item Identification Guide: A044A0
Assigment Date: 06/06/1967

A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see bearing,ball,duplex. Excludes:bearing,ball,airframe.

straight bore shape, 0.0003 inches minimum radial and 0.0009 inches maximum radial internal clearance, 6.00 millimeters nominal bore diameter, radial load direction, contact bearing seal type

Datasheet

Below are the comprehensive technical specifications for bearing: 3110-00-057-0630 . Find dimensions, materials, tolerances, performance characteristics, etc.

Bearing Seal Type: contact
Bore Diameter: 6.00 millimeters nominal
Bore Shape: straight
Internal Clearance: 0.0003 inches minimum radial and 0.0009 inches maximum radial
Load Direction: radial
Lubrication Material Document And Classification: mil-g-81322 mil spec single material response
Lubrication Material: grease
Overall Outside Diameter: 19.00 millimeters nominal
Overall Width: 6.0 millimeters nominal
Material: rubber synthetic seal
Material: steel ball
Material: steel inner ring
Material: steel outer ring
Material: steel retainer
Retainer Fabrication Method: pressed
Seal Quantity: 2
Standard Tolerance Designation: abec no.3
Style Designator: non-loading groove, non-separable
Surface Finish: ground

Replaces

The NSN 3110-00-057-0630 is used in place of the following discontinued or alternate items:

NSN	Name	Date
3110-00-868-8550	No Name Available	01/09/1972

Frequently Asked Questions

Find quick answers to common questions about bearing: Z99036RLR3LU699YH. Explore technical specifications, installation tips, maintenance guidelines, regulatory requirements, and troubleshooting advice.

What is the FSCG of the NSN 3110-00-057-0630?: The FSCG of the NSN 3110-00-057-0630 is 3110

Does the NSN 3110-00-057-0630 have a Schedule B code assigned?: Yes, the Schedule B code is 8482105028

Does NSN 3110-00-057-0630 require demilitarization?: Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Does NSN 3110-00-057-0630 contain precious materials?: Precious metal content is unknown

Does NSN 3110-00-057-0630 contain hazardous materials?: Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.